Real HD 16-Port Fast Ethernet PoE+ Alternatives: 6 Similar Picks Compared

How alternatives compare to Real HD

YuanLey 16-Port PoE+ Switch with 2 Gigabit Uplinks

The YuanLey 16-Port PoE+ Switch offers a 250W power budget, which is 50W less than the Real HD model. It shares the same Fast Ethernet speed on the sixteen PoE ports and includes two gigabit uplinks. This unit uses an unmanaged design, so you get the same plug-and-play simplicity without configuration software. The blue casing is slightly lighter at 4.17 pounds compared to the Real HD’s 4.3 pounds. You should choose this if you need a lower cost option for basic camera networks where the reduced power budget is sufficient. It lacks the extend mode and VLAN features found in the Real HD, making it a simpler, budget-focused choice for straightforward deployments.

YuanLey 16-Port PoE+ Switch with 2 Uplinks

This YuanLey model upgrades the port speed to Gigabit for all sixteen PoE ports, a significant improvement over the Real HD’s 10/100 Mbps limit. It maintains a 250W power budget and includes two gigabit uplinks. Like the Real HD, it is unmanaged, but it adds Port-Based VLAN isolation. This feature allows you to isolate PoE ports from each other while communicating with uplinks, improving network performance and security. The device weighs 4.43 pounds and fits in standard racks. Pick this switch if you need higher data speeds for each camera or access point. You trade 50W of total power for faster local network transmission and better traffic segmentation capabilities.

NICGIGA 16-Port PoE+ Switch 250W

The NICGIGA switch provides Gigabit speeds on its sixteen PoE ports, doubling the data rate of the Real HD. It offers a 250W power budget, which is lower than the Real HD’s 300W. This unit includes three uplink options, combining SFP slots with gigabit ports for flexible backbone connections. It features automatic device recovery and basic VLAN security in an unmanaged package. The black housing is designed for rack mounting. Choose this alternative if you require faster data throughput and redundant uplink options. You give up some power budget and the extend mode found in the Real HD, but gain better network resilience and speed for modern IP cameras.

SICSOLINK 16 Port PoE+ Switch

The SICSOLINK 16 Port PoE+ Switch matches the Real HD with Fast Ethernet speeds on the sixteen PoE ports. It includes two gigabit uplinks for backbone connectivity. This model weighs only 1.6 pounds, making it significantly lighter than the Real HD. It focuses on surge protection and high power delivery for camera networks. The unmanaged design ensures easy installation without software. Select this switch if you prioritize lightweight construction and basic surge protection for outdoor or industrial camera setups. You lose the extend mode and VLAN features of the Real HD, and the specific power budget is not listed, but you gain a compact form factor suitable for tight rack spaces.

STEAMEMO 16-Port 240W Managed PoE+ Switch

The STEAMEMO switch is a managed PoE+ unit, unlike the unmanaged Real HD. It provides Gigabit speeds on all sixteen ports and a 240W power budget. This model includes SFP uplinks and app control for remote management. You can configure VLANs and monitor network status via software. The black casing supports wall or rack mounting. Choose this if you need remote configuration and traffic management features. You sacrifice the higher 300W power budget and the plug-and-play simplicity of the Real HD. This switch is better for small offices or complex networks where you need to isolate segments and control power delivery remotely rather than relying on static, unmanaged connections.

Real HD 16-Port Gigabit PoE Switch with SFP

The Real HD 16-Port Gigabit PoE Switch with SFP upgrades the port speed to Gigabit for all sixteen PoE ports. It retains the unmanaged, quiet operation of the original but adds SFP uplinks for fiber connectivity. This model weighs 5.42 pounds, making it heavier than the original. It is designed for static installations where remote management is unnecessary. Pick this if you need higher data speeds and fiber uplink options. You give up the 300W power budget specification of the original Fast Ethernet model, but gain the ability to connect to high-speed backbone networks. This is ideal for users who want the same brand reliability but with faster local network performance.

Quick picks

Our 7 picks

1 Best overall

Real HD 16-Port Fast Ethernet PoE+ Switch

Best for: surveillance systems needing high power

Port Count

16

Port Speed

10/100 Mbps

Management Type

Unmanaged

PoE Support

PoE+ (802.3af/at)

PoE Power Budget

300W

Uplink Ports

2 Gigabit Uplink Ethernet Ports

View on Amazon: Real HD 16-Port Fast Ethernet PoE+ Switch Affiliate link

This unmanaged switch provides 16 PoE+ ports at 10/100 Mbps with a 300W budget. It includes two Gigabit uplink ports for higher-speed connections to your router or NVR. The fanless metal design operates quietly and withstands temperatures from -20 to 50°C. It supports extend mode for longer cable runs and port-based VLAN isolation. This unit suits users needing reliable power delivery for surveillance or access points without configuration complexity.

Pros

• 300W total PoE+ power budget
• Fanless metal housing for quiet operation
• Two Gigabit uplink ports
• Supports extend mode for 250m range
• Port-based VLAN isolation feature

Cons

• PoE ports are limited to 10/100 Mbps
• Unmanaged interface requires no software setup
• Heavier build at 4.3 pounds

Good fit if

• You need high power budget for many devices
• You want quiet operation without fans
• You require simple plug-and-play setup

Skip if

• You require Gigabit speeds on all PoE ports
• You need web-based management controls
• You prefer a lightweight plastic chassis

Verdict: Real HD 16-Port PoE+ Switch delivers robust power and quiet operation for surveillance networks. It fits users who prioritize budget and reliability over per-port speed and management features.

2 Also great

YuanLey 16-Port PoE+ Switch with 2 Gigabit Uplinks

Best for: IP surveillance setups needing simple PoE power

Port Count

18

Port Speed

10/100 Mbps

Management Type

Unmanaged

PoE Support

PoE+ (802.3af/at)

PoE Power Budget

250W

Uplink Ports

2 x Gigabit

View on Amazon: YuanLey 16-Port PoE+ Switch with 2 Gigabit Uplinks Affiliate link

This unmanaged switch gives you 16 Fast Ethernet PoE+ ports and two dedicated Gigabit uplink ports. With a 250W total power budget and up to 30W per port, it powers standard 802.3af/at hardware like IP cameras and access points. It also includes port isolation and an extended 250-meter range mode for distant surveillance runs.

Pros

• 250W total PoE power budget supporting up to 30W per port
• Two 1000Mbps Gigabit uplink ports for router or NVR connections
• Hardware VLAN isolation and 250-meter extension mode
• Plug-and-play setup with automatic PoE device detection

Cons

• PoE device ports run at 10/100Mbps rather than Gigabit speeds
• Does not support passive PoE devices
• Unmanaged design lacks web or software configuration options

Good fit if

• You need to power IP cameras or access points that operate on 10/100Mbps links.
• You want plug-and-play installation without configuring network management software.
• You have surveillance cable runs reaching up to 250 meters.

Skip if

• You require Gigabit data speeds across all connected endpoints.
• You deploy hardware that relies on 24V passive PoE.
• You need managed switch features for custom traffic routing.

Verdict: YuanLey 16-Port Fast Ethernet PoE+ Switch supplies 250W of power across 16 ports with dual Gigabit uplinks for users building unmanaged IP camera networks.

3 Best premium

YuanLey 16-Port PoE+ Switch with 2 Uplinks

Best for: Security systems needing VLAN isolation

Port Count

18

Port Speed

1000Mbps

Management Type

Unmanaged

PoE Support

IEEE802.3af/at

PoE Power Budget

250W

Uplink Ports

2 Gigabit UpLink

View on Amazon: YuanLey 16-Port PoE+ Switch with 2 Uplinks Affiliate link

The YuanLey 16-Port Gigabit PoE Switch offers 16 PoE+ ports and 2 uplink ports, all running at 1000Mbps. It provides a 250W power budget, supporting up to 30W per port for connected devices. The unit includes VLAN isolation to reduce network congestion. Its metal chassis supports desktop or rackmount placement. This unmanaged switch suits users needing reliable Gigabit connectivity with basic traffic segmentation.

Pros

• All 18 ports support 1000Mbps Gigabit speeds
• 250W total PoE budget with 30W per port limit
• VLAN isolation on ports 1-16 reduces network congestion
• Metal chassis allows desktop or rackmount installation

Cons

• Unmanaged design limits advanced configuration options
• Industrial fan may produce audible noise
• Blue color may not match all equipment aesthetics

Good fit if

• You need all Gigabit ports for high-speed camera feeds
• You require VLAN isolation to segment network traffic
• You prefer a metal chassis for durability

Skip if

• You need web-based management for detailed settings
• You require silent operation without fan noise
• You need SFP uplink ports for fiber connectivity

Verdict: The YuanLey 16-Port Gigabit PoE Switch fits users who need reliable 1000Mbps connectivity with VLAN isolation. It is a solid choice for security systems requiring stable power delivery and traffic segmentation.

4 Also great

NICGIGA 16-Port PoE+ Switch 250W

Best for: basic security and auto-recovery needs

Port Count

19

Management Type

Unmanaged

PoE Support

PoE+ (802.3af/at)

PoE Power Budget

250 W

Uplink Ports

1 x SFP

Mounting Type

Desktop, Rackmount

View on Amazon: NICGIGA 16-Port PoE+ Switch 250W Affiliate link

This unmanaged 19-port switch provides 16 PoE+ ports with a 250W total budget, delivering up to 30W per port. It includes two gigabit RJ45 uplinks and one SFP port for fiber connectivity. The AI Watchdog feature automatically recovers offline devices, while One-Key VLAN mode isolates ports for security. Its metal housing supports desktop or rack mounting. It suits users needing reliable power delivery and basic network segmentation without management complexity.

Pros

• 250W PoE+ power budget with 30W per port
• AI Watchdog for automatic device recovery
• One-Key VLAN mode for port isolation
• 4KV lightning protection design
• Includes 2 gigabit RJ45 and 1 SFP uplink

Cons

• Unmanaged configuration limits advanced network control
• No web or app-based management interface
• Fixed 250W budget may limit high-power devices

Good fit if

• You need a simple, plug-and-play PoE solution
• You require VLAN isolation for security without management
• You want automatic recovery for connected devices

Skip if

• You need managed features like QoS or SNMP
• You require more than 250W of PoE power
• You prefer web-based configuration over physical buttons

Verdict: NICGIGA 16-Port PoE+ Switch 250W is a straightforward choice for users who prioritize automatic device recovery and basic VLAN security in a rugged, unmanaged package.

5 Best ip cameras

SICSOLINK 16 Port PoE+ Switch

Best for: silent 16-camera surveillance and VoIP installations

Port Count

16

Port Speed

10/100 Mbps

Management Type

Unmanaged

PoE Support

PoE+ (802.3af/at)

PoE Power Budget

250W

Uplink Ports

2 Gigabit

View on Amazon: SICSOLINK 16 Port PoE+ Switch Affiliate link

This unmanaged switch gives you 16 Fast Ethernet PoE+ ports with a 250W power budget, alongside two dedicated Gigabit uplink ports. It includes one-touch VLAN isolation, a 250-meter extension mode, and a fanless metal rackmount housing with 6KV surge protection. It suits your setup if you deploy IP cameras, access points, or VoIP phones across a quiet office or server rack.

Pros

• 250W total PoE+ budget with up to 30W per port
• Dual 1000 Mbps Gigabit uplink ports for core routers or NVRs
• Fanless metal chassis for silent operation
• Built-in 6KV surge protection across all ports
• Extend Mode supports cable runs up to 250 meters

Cons

• PoE ports operate at 10/100 Mbps rather than Gigabit speeds
• Unmanaged design provides no web interface or remote management
• One-year warranty period

Good fit if

• You need a quiet, fanless rackmount switch to power up to 16 PoE devices.
• You want dedicated Gigabit uplinks to prevent bandwidth bottlenecks at your NVR.
• You require cable runs up to 250 meters for remote IP cameras.

Skip if

• You require Gigabit speeds across your local PoE ports.
• You need managed switch settings such as software-based VLANs or SNMP monitoring.

Verdict: SICSOLINK 16-Port Fast Ethernet PoE+ Switch delivers silent, fanless power for multi-camera surveillance systems that need dedicated Gigabit uplinks without complex management. It serves surveillance installers who need up to 250W distributed across 16 low-bandwidth endpoints.

6 Best budget

STEAMEMO 16-Port 240W Managed PoE+ Switch

Best for: Small offices needing VLANs

Port Count

16

Port Speed

100 Mbps

Management Type

Managed

PoE Support

PoE+ (802.3at)

PoE Power Budget

240W

Uplink Ports

2 x Gigabit Uplink, 1 x 1.25G SFP

View on Amazon: STEAMEMO 16-Port 240W Managed PoE+ Switch Affiliate link

This is a managed 16-port PoE+ switch with a 240W budget. It offers 100 Mbps PoE ports, two gigabit uplinks, and one SFP port. You get web, app, and desktop management. It supports VLANs, QoS, and storm control. The fanless design is quiet. It fits small businesses needing smart features.

Pros

• 240W PoE+ budget for 16 ports
• Managed via web, app, or desktop
• VLAN and QoS support
• Fanless silent operation

Cons

• PoE ports are only 100 Mbps
• No mention of PoE standard 802.3af
• Heavier than unmanaged options

Good fit if

• You need VLAN segmentation
• You want mobile app control
• You require silent operation

Skip if

• You need full gigabit PoE ports
• You prefer unmanaged simplicity
• You need 802.3af support

Verdict: STEAMEMO 16-Port Managed PoE+ Switch suits small offices needing VLANs and app control. It fits users who prioritize management features over port speed.

7 Also great

Real HD 16-Port Gigabit PoE Switch with SFP

Best for: Gigabit PoE deployments needing SFP uplinks

Port Count

16

Port Speed

10/100/1000 Mbps

Management Type

Unmanaged

PoE Support

802.3af/at

PoE Power Budget

300W

Uplink Ports

2 x Gigabit SFP, 2 x Gigabit RJ45

View on Amazon: Real HD 16-Port Gigabit PoE Switch with SFP Affiliate link

This unmanaged switch provides 16 Gigabit Ethernet ports and two SFP uplinks. It delivers a 300W PoE budget, supporting 802.3af/at standards for IP cameras and access points. The fanless metal design operates quietly without active cooling. You can mount it on a desk, wall, or in a rack. It offers plug-and-play simplicity for straightforward network expansions.

Pros

• 16 Gigabit Ethernet ports for fast data transfer
• 300W total PoE power budget supports many devices
• Fanless design ensures quiet operation in office spaces
• Flexible mounting options include desktop, wall, or rack
• Includes two SFP ports for fiber uplinks

Cons

• Unmanaged interface lacks remote monitoring or configuration tools
• Extend mode reduces port speed to 10 Mbps
• Heavy metal chassis weighs 5.42 pounds

Good fit if

• You need Gigabit speeds for all connected devices
• You require SFP uplink options for fiber connections
• You prefer silent, fanless operation for office environments

Skip if

• You need managed features like VLANs or traffic prioritization
• You require speeds above 10 Mbps on extended distances
• You need a lightweight, portable switch for travel

Verdict: Real HD 16 Port Gigabit PoE Switch suits users who need robust Gigabit connectivity and SFP uplinks in a quiet, unmanaged package. It is ideal for static installations where remote management is unnecessary.

Specifications side by side

Frequently asked questions