As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Ubiquiti UniFi USW-Aggregation Review: 8-Port 10G SFP+ Switch

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Ubiquiti UniFi USW-Aggregation is a managed Layer 2 switch with eight 10G SFP+ ports and no copper ports at all, in a 1U rack-mount case 17.4 inches wide. Its job is to tie together 10G uplinks: several UniFi access switches, a server or a NAS, linked with SFP+ fiber modules or DAC cables. This listing states a three-year warranty against factory defects. It suits a rack that already runs UniFi; outside that, GoodTop's GT-SWTXG8FM gives the same eight SFP+ ports with a plain web interface in a small fanless box. The listing is short, so details below come from its title and size data, not from hands-on testing.

What stands out

  • Eight 10G SFP+ ports
  • Managed Layer 2, part of the UniFi line
  • 1U rack mount, 17.4 in wide
  • Three-year warranty stated

Who it fits

Good fit for

UniFi networks that need a 10G core: several UniFi switches with SFP+ uplinks, a 10G NAS or server, all managed in one UniFi dashboard.

Who should skip it

Anyone without SFP+ devices (it has no RJ45 ports), networks that need Layer 3 routing (the UniFi Pro Aggregation adds it), or a desk setup that has no rack.

Verdict: A tidy 10G core for UniFi racks; non-UniFi users have simpler options.

USW-Aggregation: key specs

8 x 10G SFP+

Takes SFP+ fiber modules or DAC cables; no RJ45 copper ports.

Managed Layer 2

VLANs and switching; routing between VLANs stays on the gateway.

1U rack mount

17.4 x 4.72 x 1.72 inches; shallow enough for small racks.

2.2 lb listed weight

The other USW-Aggregation listing states 5.84 lb; one of the two figures is wrong.

Three-year warranty

Against factory defects, per this listing.

Model USW-Aggregation

Same model code as Ubiquiti's other UniFi Switch Aggregation listing.

Short 1U case

The USW-Aggregation is a full-width 1U unit but only about 4.7 inches deep, so it fits shallow network racks and wall cabinets. All eight SFP+ cages sit on the front. The listing gives two different weights across its two listings (2.2 lb here, 5.84 lb on the other), which does not change how it fits a rack.

Where it sits in a network

In a typical UniFi rack the gateway feeds the USW-Aggregation, and each access switch, the NAS and any 10G server connect to it with SFP+ links. That keeps traffic between switches at 10G instead of 1G. Each port needs its own SFP+ module or DAC cable, which the listing does not include, so budget for them. Management sits in the UniFi Network application with the rest of the UniFi gear.

USW-Aggregation, Pro Aggregation or GoodTop?

Choose the USW-Aggregation if your switches are UniFi and you want one dashboard for the 10G core. Choose the UniFi Pro Aggregation if you need Layer 3 routing and more ports in a deeper chassis. Choose GoodTop's GT-SWTXG8FM if you are not on UniFi and want eight SFP+ ports with web management in a fanless desktop box.

Check before you buy

  • Devices with SFP+ ports or 10G modules
  • A rack or wall cabinet
  • A UniFi controller already running
  • Budget for SFP+ modules or DAC cables

The product at a glance

Ubiquiti UniFi Managed 10G Aggregation Switch

Best for: UniFi racks with 10G uplinks

Management Type
Managed
Mounting Type
Rack mounting, 1U
Port Speed
10G
Uplink Port Type
SFP
Dimensions
4.72 × 17.4 × 1.72 inches
Weight
2.2 pounds

View on Amazon: Ubiquiti UniFi Managed 10G Aggregation Switch Affiliate link

UniFi USW-Aggregation: eight 10G SFP+ ports, managed Layer 2, 1U rack.

Pros

  • Eight 10G SFP+ ports
  • UniFi dashboard management
  • Shallow 1U case

Cons

  • No RJ45 ports
  • Layer 2 only
  • Sparse listing details

Good fit if

  • You run UniFi and need a 10G core

Skip if

  • You are not on UniFi or need copper ports

Verdict: A clean 10G core for UniFi racks.

Specifications side by side

Spec Ubiquiti UniFi Managed 10G Aggregation Switch
Management Type Managed
Mounting Type Rack mounting, 1U
Port Speed 10G
Uplink Port Type SFP
Dimensions 4.72 × 17.4 × 1.72 inches
Weight 2.2 pounds
Color White
Model USW-Aggregation

Frequently asked questions

Does the USW-Aggregation have RJ45 ports?

No. It has eight 10G SFP+ ports only; copper needs SFP+ RJ45 modules.

Is it Layer 3?

No. This listing names it a managed Layer 2 switch; the UniFi Pro Aggregation lists Layer 3 routing.

What warranty comes with this listing?

Three years against factory defects.

Are SFP+ modules included?

The listing does not say so; plan on buying modules or DAC cables.

Will it fit a shallow rack?

Yes. It is 1U and about 4.7 inches deep.

See also