Ubiquiti UniFi Pro Aggregation Switch Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Ubiquiti UniFi Pro Aggregation (model USW-Aggregation-Pro) is a managed, rack-mount core switch for UniFi networks. Its listing names 10 Gigabit Ethernet, optical fiber support and Layer 3 routing, but it does not give the number or type of ports, which is the main thing an aggregation switch buyer needs. At close to a thousand dollars it is for businesses and large home labs already running UniFi, and only after checking Ubiquiti's own spec sheet. We wrote this from the listing and did not test the switch.
What stands out
- Managed Layer 3 switch with routing
- 10 Gigabit Ethernet with fiber support
- 19-inch rack-mount chassis
- Built for UniFi networks
Who it fits
Good fit for
UniFi sites that need a 10G fiber core to tie together several access switches, a NAS or servers.
Who should skip it
Home users, anyone outside the UniFi system, and anyone who needs the port count confirmed from the listing itself.
Verdict: Likely a capable UniFi core switch, but the listing is too thin to buy from alone.
What the listing does and does not say
Layer 3
It can route between networks as well as switch.
10 Gigabit Ethernet, fiber
Links run at 10G over optical modules; the listing does not say how many ports.
Managed
Configuration and monitoring, through UniFi in practice.
17.4 x 12.8 x 1.7 in, 10.1 lb
A full-width 1U rack unit.
Rack hardware
This is a full-width, 1U-height rack switch weighing about 10 lb. The listing mentions an internal power supply but not redundant power or fans, so check those on Ubiquiti's spec page.
Where it fits
An aggregation switch sits at the center of a network: access switches and servers connect to it over fiber, and it moves traffic between them at 10G. With Layer 3 routing it can also handle traffic between VLANs without sending it to the router. The listing's line about connecting two standard Ethernet ports is unclear and may describe management ports.
Verify before ordering
An expensive switch with a short listing.
Check before you buy
- Ubiquiti's spec sheet shows the port count and speeds you need
- Your network already runs UniFi
- You have SFP+ or similar fiber modules and cables planned
- You have a rack with room for a full-width 1U unit
The product at a glance
Ubiquiti UniFi 10G Layer 3 Aggregation Switch
Best for: UniFi network cores
- Port Speed
- 10 Gigabit Ethernet
- Dimensions
- 12.8 × 17.4 × 1.7 inches
- Weight
- 10.1 pounds
View on Amazon: Ubiquiti UniFi 10G Layer 3 Aggregation Switch Affiliate link
Ubiquiti UniFi Pro Aggregation: managed Layer 3 10G fiber switch for 19-inch racks; listing omits port counts.
Pros
- Layer 3 routing
- 10G fiber core for UniFi
- Rack-mount
Cons
- Listing gives no port count
- Close to a thousand dollars
- Little use outside UniFi
Good fit if
- You run UniFi and need a 10G fiber core for several access switches
Skip if
- You expected a full spec list on the product page
Verdict: Check Ubiquiti's spec sheet first; the listing is not enough.
Specifications side by side
| Spec | Ubiquiti UniFi 10G Layer 3 Aggregation Switch |
|---|---|
| Port Speed | 10 Gigabit Ethernet |
| Dimensions | 12.8 × 17.4 × 1.7 inches |
| Weight | 10.1 pounds |
| Size | 1.7" x 17.4" x 12.8" |
| Color | Information Not Available |
| Model | USW-Aggregation-Pro |
Frequently asked questions
How many ports does the UniFi Pro Aggregation have?
The listing does not say; check Ubiquiti's spec sheet before buying.
Is the USW-Aggregation-Pro a Layer 3 switch?
Yes, the listing says it can do Layer 3 routing.
Does it use fiber or copper?
The listing names optical fiber support and 10 Gigabit Ethernet.
Who is it for?
Businesses and advanced home labs with a UniFi network and several 10G links.
Is it different from the plain UniFi Aggregation switch?
Yes, it is the Pro model, a full-width rack unit with Layer 3 features; the plain Aggregation is a smaller Layer 2 switch reviewed separately.
See also
- tp link ac1750 wifi extender review
- tp link ac2600 wifi extender dual review
- tp link ac750 wifi range extender review
- ubiquiti networks ubiquiti unifi switch aggregation review
- ubiquiti unifi usw aggregation 10g sfp switch review
- ubiquiti networks ubiquiti unifi g6 pro review
- ubiquiti networks ubiquiti unas pro 4 review
