UGREEN 6-Port Gigabit PoE Switch Review (2026): A Spec-Based Look

What stands out

• Six total ports with four dedicated PoE+ outputs and two Gigabit uplink ports.
• 60W total power budget with intelligent load management that prioritizes ports 4–1.
• One-button toggle for Standard, Port Isolation (VLAN), and Extend modes.
• Extend mode supports PoE transmission up to 820 feet for long-distance deployment.

Who it fits

UGREEN 6-Port Switch Key Specs

Port Count: 6

This switch provides six physical connections for your network. You get four ports for powered devices and two dedicated uplink ports. This layout lets you connect cameras, access points, and phones while reserving separate links for your router or switch backbone. It suits users who need to expand their wired network without adding another powered hub. Compare this count to smaller 4-port models if you have multiple devices to attach.

PoE Support: PoE+ (802.3at/af)

The device supports the PoE+ standard, which delivers up to 30 watts per port. This covers most security cameras, Wi-Fi access points, and IP phones. It is more powerful than basic PoE but less than PoE++ standards. You do not need separate power adapters for these devices. Check your device requirements to ensure they fall within this wattage range before purchasing.

PoE Power Budget: 60W

The total power available across all PoE ports is 60 watts. This limit applies to the entire switch, not each port. If you connect high-power devices, the switch manages distribution intelligently. It prioritizes ports to prevent overload. This budget suits moderate setups with several low-power cameras. It may be tight if you plan to power multiple high-drain access points simultaneously.

Port Speed: 1000Mbps

All ports operate at Gigabit speeds, allowing data transfer up to 1000 megabits per second. This ensures fast performance for video surveillance and network traffic. It prevents bottlenecks when moving large files or streaming high-quality video. Compare this to older 100Mbps switches if you need higher throughput. Gigabit speed is standard for modern home and small office networks.

Management Type: Unmanaged

This switch requires no software configuration or login. You plug it in, and it works immediately. It handles data flow automatically without user intervention. This simplicity reduces setup time and eliminates configuration errors. It is ideal for users who want a reliable connection without technical hassle. Managed switches offer more control but require network knowledge and setup.

Design And Build Overview

The UGREEN 6-Port Gigabit PoE Switch presents a compact, functional design suited for discreet installation. According to the listing, the unit features a gray finish and carries the model number 35371US. The exterior appears to be constructed from durable plastic, a standard choice for unmanaged switches that prioritizes heat dissipation and lightweight portability over premium aesthetics. This material choice suggests the device is built for practical, everyday use in various environments without drawing attention to itself.

Layout efficiency is central to this device. You get six physical ports arranged to separate powered devices from uplink connections. Four ports support PoE+ at 802.3at/af standards, while two dedicated Gigabit uplink ports handle data traffic to your router or switch. This clear separation simplifies cable management for security cameras, access points, or IP phones. The unmanaged nature means you do not need to configure software settings, reducing setup complexity for users who prefer a plug-and-play experience.

Controls are minimal but effective. A single button allows you to switch between three modes: Standard, Port Isolation, and Extend. This physical toggle provides immediate flexibility without accessing a web interface. Port Isolation helps prevent network storms by separating ports one through four. Extend mode supports PoE up to 820 feet, a critical feature for long-distance security deployments. Indicator lights provide visual status updates, ensuring you can monitor connectivity at a glance. The design focuses on reliability and ease of use, making it suitable for both home and small office networks where straightforward operation is valued.

Setup And Everyday Use

You set up this UGREEN switch by plugging it into power and connecting your network cables. It is an unmanaged device, so you do not need to install drivers or access a configuration page. The unit is plug-and-play. You connect your router or switch to the two Gigabit uplink ports. Then, you attach your powered devices to the four PoE+ ports. The switch auto-detects which devices support Power over Ethernet. It supplies power only to those devices. Non-PoE devices receive data only. Indicator lights show the status of each connection. This makes initial deployment straightforward.

For daily use, the switch handles standard network traffic at 1000Mbps. It supports full-duplex and half-duplex modes. The intelligent power management protects your network. If the total power demand exceeds the 60W budget, the switch cuts ports in priority order from four down to one. This prevents overload. Short-circuited ports also shut off independently. You can change modes with a single button. Standard mode works for most homes. Port isolation mode separates ports one through four. This prevents network storms in larger setups. Extend mode allows PoE delivery up to 820 feet. This is useful for security cameras or access points placed far from the main network. The device runs quietly and continuously without user intervention.

Before You Buy This PoE Switch

You need a reliable power source for this unmanaged switch. It requires continuous electricity to maintain your network connections. Check your available outlets near your router or server rack. This device does not have battery backup. If power fails, all connected PoE devices will lose connection. Verify that your devices support 802.3at or 802.3af standards. The switch supplies up to 30W per port. Ensure your cameras or access points do not require higher wattage. This unit fits well in homes with multiple wired devices. It complements mesh WiFi systems by providing stable backhaul or direct connections. You do not need complex configuration tools. Just plug in cables and power. Keep the area around the vents clear for airflow. The gray plastic housing is durable but can collect dust. Wipe it occasionally with a dry cloth. This switch is best for users who want simplicity without sacrificing performance. It handles standard home networking tasks efficiently.

Check before you buy

• Confirm your devices support 802.3at or 802.3af PoE standards.
• Ensure your total power draw stays under the 60W budget.
• Check that your cameras or phones need less than 30W per port.
• Verify you have a nearby power outlet for the adapter.

The product at a glance

1

UGREEN 6-Port Gigabit PoE Switch

Best for: small networks needing four PoE ports

Port Count

6

Port Speed

Gigabit

Management Type

Unmanaged

PoE Support

PoE+ (802.3at/af)

PoE Power Budget

60W

Uplink Ports

2 Gigabit

View on Amazon: UGREEN 6-Port Gigabit PoE Switch Affiliate link

This unmanaged switch provides four PoE+ ports and two Gigabit uplinks. It delivers a 60W total power budget, supporting up to 30W per PoE port. The device includes port isolation and extend modes for flexible deployment. You get 1000Mbps speeds for connected devices. It is suitable for small networks needing reliable power and data delivery without configuration complexity.

Pros

• Four PoE+ ports with 30W per-port limit
• Two Gigabit uplink ports for high-speed connections
• Port isolation and extend modes for network control
• Intelligent power management prevents overload

Cons

• Unmanaged design limits advanced configuration options
• 60W total power budget may restrict high-power devices
• No web interface or app for remote monitoring

Good fit if

• You need to power four PoE devices simultaneously
• You require port isolation for security segmentation
• You want a plug-and-play setup without configuration

Skip if

• You need to power devices exceeding 30W per port
• You require advanced VLAN or routing features
• You need more than four PoE ports

Verdict: UGREEN 6-Port PoE Switch fits users who need a simple, reliable way to power and connect four PoE devices. It is ideal for small offices or homes where basic network segmentation is required.

Specifications side by side

Frequently asked questions

See also

• ugreen 6 port gigabit poe switch alternatives
• best UGREEN network switches with 5 Ports
• ugreen 300w 48000mah 300w 5 port review
• ugreen steam deck dock 6 in 1 review