Sootozy TPWH-01 Deco Wall Mount 3-Pack Review: Fit and Value
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Sootozy TPWH-01 3-pack puts three white plastic holders in one box, one for each node of a typical three-piece TP-Link Deco kit. The listing names the Deco X55, X20, X50, X60, X4300 Pro, X5000, X5400 Pro, W3600, W4500, W6000 and the AX3000 kit as compatible. Each holder can go up with screws or with the supplied adhesive pads. It is a good buy if you are mounting a whole Deco 3-pack, since the box costs about twice a single holder while holding three.
Verdict: Worth it for anyone hanging a full three-node Deco system on the wall. Check the model name on your Deco's base against the fit list first, and buy a single or 2-pack if you have fewer nodes.
What the listing specifies
Model TPWH-01, 3 holders
Three identical brackets, one per Deco node.
Fits 11 Deco models
X55, X20, X50, X60, X4300 Pro, X5000, X5400 Pro, W3600, W4500, W6000 and the AX3000 kit, per the listing.
Screws or adhesive pads
Drill for a firm hold, or use the pads on clean, well-bonded paint.
Vented base
Holes under the Deco let warm air escape from the bottom of the tower.
Shape and build
The holder is a white cradle that the round Deco tower sits in, with ventilation holes in its floor. The listing does not state the material, weight or dimensions, so we cannot confirm how thick the plastic is. It is sold in white only.
Putting it up
Pick spots for the three nodes first, then fix each cradle with two screws or press it on with the adhesive pads. Sootozy asks buyers to clean the wall and check that the paint is firmly attached before using adhesive. Run the power cable down from the bottom so the unit sits flat in the cradle.
Before you buy
Turn your Deco over and read the model name: the fit list is long but does not cover every Deco. Decide between screws and adhesive based on the wall surface. Then match the pack size to your node count, as the same holder comes in 1-, 2- and 3-packs.
Check before you buy
- Deco model appears in the fit list
- Three nodes to mount, not two
- Paint is sound enough for adhesive, or a drill is handy
- Power outlet within cable reach of each spot
The product at a glance
Sootozy Deco Mesh Wall Mount 3-Pack
Best for: Three-node Deco homes
- Wi-Fi Standard
- Wi-Fi 6
- Speed Rating
- AX3000
- Pack Size
- 3-Pack
- Features
- Mesh
- Mounting Type
- Wall Mount
View on Amazon: Sootozy Deco Mesh Wall Mount 3-Pack Affiliate link
A 3-pack of Sootozy TPWH-01 cradles for round TP-Link Deco towers, listed for eleven Deco models. Each cradle takes screws or adhesive pads and has a vented base.
Pros
- Three holders for a full Deco kit
- Long, specific fit list
- Screw or no-drill adhesive install
Cons
- No size, weight or material on the listing
- Not for Deco models outside the list
Good fit if
- You are mounting a three-node Deco X55, X20 or similar kit
Skip if
- You have one or two Deco nodes
Verdict: The value pack for full Deco kits.
Specifications side by side
| Spec | Sootozy Deco Mesh Wall Mount 3-Pack |
|---|---|
| Wi-Fi Standard | Wi-Fi 6 |
| Speed Rating | AX3000 |
| Pack Size | 3-Pack |
| Features | Mesh |
| Mounting Type | Wall Mount |
| Size | 3 Pack for Tp-Link Deco |
| Color | White 3 Pack |
| Model | TPWH-01 |
Frequently asked questions
Which Deco models does the TPWH-01 fit?
The listing names the Deco X55, X20, X50, X60, X4300 Pro, X5000, X5400 Pro, W3600, W4500, W6000 and the AX3000 kit.
Is the 3-pack better value than buying singles?
Yes. The three-holder box costs about two singles, so it only makes sense when you have three nodes.
Do I need to drill?
No. Adhesive pads come in the box, but screws give a firmer hold on weak paint.
Does it help the Deco stay cool?
The cradle has ventilation holes in its base so air can move under the tower.
Is there a black version?
The listing shows white only.
Featured in
See also
- xikestor 16 port 2 5g l3 managed switch review
- tp link deco x55 ax3000 wifi review
- tp link ax1800 wifi 6 router review
- sootozy wall mount starlink review
- sootozy eero pro 7 wall mount 2 pack review
- Sootozy TPWH-01 Wall Mount for TP-Link Deco (1-Pack) Review
- Sootozy eero Pro 7 Wall Mount (1-Pack) Review
- aurakich wall mount range review
- delta 24 in wall mount review
