Sootozy TPWH-01 Wall Mount for TP-Link Deco (1-Pack) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Sootozy TPWH-01 is a white plastic wall holder for one tower-style TP-Link Deco unit. Sootozy lists it for the Deco X55, X20, X50, X60, X4300 Pro, X5000, X5400 Pro, W3600, W4500 and W6000 (and "AX3000" models). You can screw it to the wall or stick it up with the included adhesive pads, and the base has vent holes. It suits a Deco that needs to sit higher than a shelf to cover a room better. If you own a 2- or 3-unit Deco kit, Sootozy's 3-pack of the same holder costs less per mount. This is an accessory, not a router; we compared the listing's claims and did not mount one ourselves.
What stands out
- Fits tower Decos: X55, X20, X50, X60, X5400 Pro and more
- Screw or adhesive mounting
- Vent holes in the base
- Single holder for one unit
Who it fits
Good fit for
Owners of one tower-style Deco (X55, X20, X50, X60, W-series) who want it off the desk and higher on a wall, or who need one extra holder for a satellite.
Who should skip it
Owners of a full 2- or 3-unit kit (the 3-pack is cheaper per holder), flat or round Decos not on the list (M5, M9 Plus, BE series), and renters on fragile paint who cannot drill.
Verdict: A cheap, simple way to lift one tower Deco; buy the 3-pack if you are mounting a whole kit.
Sootozy TPWH-01: what the listing states
Model TPWH-01, 1 pack
One white holder for one Deco unit.
Listed Deco models
X55, AX3000, X20, X50, X60, X4300 Pro, X5000, X5400 Pro, W3600, W4500, W6000.
Screw or adhesive install
Adhesive pads included; clean the wall and check the paint first.
Vented bottom
Holes in the base let air move around the router.
No size or load figure
The listing gives no dimensions or weight limit.
A cradle for tower Decos
The holder is a white cradle that the Deco tower sits into, with vent holes on the bottom so the unit is not sealed in. Sootozy lists only tower-style Decos, so the round M-series and the larger BE Wi-Fi 7 units are not covered. The listing gives no dimensions or weight rating; check your exact model against the list before ordering.
Mounting and daily use
For a solid hold, screw it to the wall. The adhesive pads are a no-drill option, but Sootozy notes the wall must be clean and the paint firmly attached, so they are a weaker choice for a heavier Deco or a textured wall.
A mesh unit placed higher and in the open usually covers a room better than one on the floor or behind a TV, and the holder also keeps the power and Ethernet cables tidier.
1-pack or 3-pack?
Choose this single holder if you have one tower Deco or need one replacement. Choose Sootozy's TPWH-01 3-pack for a 2- or 3-unit Deco kit; it costs about twice the single and holds three units. Choose a different mount if your Deco is a BE-series Wi-Fi 7 model, which needs a larger holder.
Check before you buy
- Your Deco model is on Sootozy's list
- A power outlet near the mounting spot
- Wall that takes screws, or clean firm paint for pads
- Only one unit to mount
The product at a glance
Sootozy Deco Wi-Fi 6 Wall Mount Stand
Best for: One tower Deco unit
- Wi-Fi Standard
- Wi-Fi 6
- Speed Rating
- AX3000
- Pack Size
- 1-Pack
- Features
- Mesh
- Mounting Type
- Wall Mount
View on Amazon: Sootozy Deco Wi-Fi 6 Wall Mount Stand Affiliate link
Single wall holder for tower-style TP-Link Deco units, with screw or adhesive mounting.
Pros
- Wide list of tower Decos
- No-drill adhesive option
- Vented base
Cons
- No size or load figures
- 3-pack is cheaper per holder
- No BE-series fit
Good fit if
- You mount one tower Deco
Skip if
- You are mounting a full kit
Verdict: Fine for one Deco; buy the 3-pack for a kit.
Specifications side by side
| Spec | Sootozy Deco Wi-Fi 6 Wall Mount Stand |
|---|---|
| Wi-Fi Standard | Wi-Fi 6 |
| Speed Rating | AX3000 |
| Pack Size | 1-Pack |
| Features | Mesh |
| Mounting Type | Wall Mount |
| Size | 1 Pack for Tp-Link Deco |
| Color | White 1 Pack |
| Model | TPWH-01 |
Frequently asked questions
Which Deco models does the Sootozy TPWH-01 fit?
Sootozy lists Deco X55, AX3000, X20, X50, X60, X4300 Pro, X5000, X5400 Pro, W3600, W4500 and W6000.
Do I need to drill to install it?
No. It can be screwed in or stuck up with the included adhesive pads on a clean, firm surface.
Does the holder block airflow?
The bottom has vent holes to help air circulate around the Deco.
Does it fit Deco BE Wi-Fi 7 units?
They are not on the compatibility list; BE-series Decos need a larger mount.
How many holders are in the box?
One. Sootozy also sells the same TPWH-01 holder as a 3-pack.
