YuanLey vs NICGIGA: Network Switches Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This YuanLey vs NICGIGA network switch comparison looks at two unmanaged PoE options for different scale needs. Both devices support IEEE 802.3af/at standards and offer plug-and-play simplicity without configuration. The main difference lies in scale and connectivity. The YuanLey model provides eight ports with 120W of power. The NICGIGA unit offers 48 PoE ports plus two SFP uplinks and 400W of total power. You choose based on how many devices you need to connect.
Key differences
| Aspect | YuanLey 8-Port Gigabit 120W PoE Switch | NICGIGA 48-Port Gigabit PoE+ Switch with 2 SFP |
|---|---|---|
| Port Count | 8 ports | 50 ports (48 PoE + 2 SFP) |
| PoE Power Budget | 120W total | 400W total |
| Uplink Ports | Not listed | 2 x 1G SFP |
| Switching Capacity | 12 Gbps | Not listed |
| Lightning Protection | Not listed | 4KV design |
Which one should you choose?
Choose YuanLey 8-Port Gigabit 120W PoE Switch if
- You need a compact switch for a small setup with up to eight devices.
- You prefer a fanless design for silent operation in a home or small office.
- You want a lower power budget of 120W for basic PoE cameras or access points.
Choose NICGIGA 48-Port Gigabit PoE+ Switch with 2 SFP if
- You need to connect 48 or more PoE devices in a large environment.
- You require fiber uplinks via SFP ports for higher bandwidth or longer distances.
- You need extra protection with 4KV lightning protection for outdoor or industrial use.
Verdict: The YuanLey switch suits small installations where silence and simplicity matter. The NICGIGA switch is better for large-scale deployments needing high power and fiber uplinks. Choose the model that matches your port count and power requirements.
Port Count and Power Budget Comparison
Port capacity
The NICGIGA switch offers significantly more connectivity options for larger deployments. It features 48 PoE+ ports alongside two Gigabit SFP uplink ports, totaling 50 connections. This allows you to power dozens of devices, such as IP cameras or access points, from a single unit. In contrast, the YuanLey model is much smaller, providing only eight ports. All eight of these ports support PoE, making it a compact solution. If you need to connect many devices in a single location, the NICGIGA provides the necessary density. The YuanLey is better suited for small offices or home setups with fewer endpoints. The difference in port count is substantial, favoring the NICGIGA for scale.
PoE power budget
Power budget determines how many high-drain devices you can run simultaneously. The NICGIGA switch provides a total PoE power budget of 400W. This allows you to connect multiple power-hungry devices, like PTZ cameras or dual-band access points, without worrying about exceeding limits. Each port can deliver up to 30W under the 802.3af/at standard. The YuanLey switch offers a 120W total budget. While sufficient for eight standard devices, it leaves little room for expansion or high-power units. If your setup includes several power-intensive devices, the NICGIGA’s higher budget prevents potential power shortages. The YuanLey is adequate for lighter loads but lacks the headroom of the NICGIGA.
Uplink connectivity
Uplink ports connect the switch to your main router or core network. The NICGIGA includes two dedicated Gigabit SFP fiber ports. These provide additional bandwidth and flexibility for connecting to other network infrastructure. The YuanLey switch does not list specific SFP uplink ports in its specifications. Instead, it relies on its eight RJ45 ports for all connections, including uplinks. This means you must use one of the PoE ports for uplink traffic on the YuanLey, reducing the number of available ports for powered devices. The NICGIGA’s separate SFP ports keep the PoE ports available for endpoints. This design offers better traffic management and scalability for the NICGIGA.
Physical dimensions
Size matters for installation in tight spaces. The YuanLey switch is compact, measuring 9.06 inches in length, 7.48 inches in width, and 2.76 inches in height. It weighs 2.16 pounds, making it easy to place on a desk or shelf. The NICGIGA switch is much larger and heavier, weighing 9.81 pounds. Its height is listed as 19 inches, suggesting it is designed for rack mounting. The YuanLey is ideal for small spaces where a large rack unit would not fit. The NICGIGA requires a standard 19-inch rack or ample desktop space. If space is limited, the YuanLey is the practical choice. For rack installations, the NICGIGA is the standard option.
Build and protection
Durability features differ between the two models. The NICGIGA switch includes a 4KV lightning protection design to safeguard equipment from voltage spikes. It also features an industrial-grade fan for heat dissipation, which is necessary for a device with 48 ports. The YuanLey switch is described as fanless, relying on bilateral heat dissipation through its metal case. This makes it silent, which is beneficial for quiet environments like offices or homes. The NICGIGA’s fan may produce noise, but it supports higher thermal loads. The YuanLey’s fanless design offers silence but may have different thermal limits. Both use metal shells for sturdiness. The choice depends on whether you prioritize silence or industrial protection.
Which Switch Fits Your Setup
Small office or home setup
You need a compact solution for a few devices. The YuanLey switch offers eight PoE+ ports with a 120W budget. Its fanless metal design ensures silent operation. The unmanaged plug-and-play feature requires no configuration. This makes it ideal for powering a small number of cameras or access points without noise or clutter.
Large surveillance or enterprise network
You require high capacity for many connected devices. The NICGIGA unit provides 48 PoE+ ports and a 400W power budget. It includes two Gigabit SFP uplink ports for robust backbone connectivity. The industrial-grade fan and 4KV lightning protection ensure stability in demanding environments. This scale suits extensive camera or AP deployments.
Rack-mounted infrastructure installer
You need equipment designed for standard server racks. The NICGIGA switch supports rack mounting alongside desktop placement. Its 50-port count and SFP uplinks facilitate centralized management of large networks. The robust metal shell and industrial fan handle heat dissipation effectively. This hardware is built for professional installations requiring durability and high port density.
The products compared
YuanLey 8-Port Gigabit 120W PoE Switch
Best for: Small offices or homes with 8 PoE devices
- Port Count
- 8
- Port Speed
- 1000 Mbps
- Management Type
- Unmanaged
- PoE Support
- PoE+ (802.3af/at)
- PoE Power Budget
- 120W
- Switching Capacity
- 12 Gbps
View on Amazon: YuanLey 8-Port Gigabit 120W PoE Switch Affiliate link
The YuanLey 8-Port Gigabit PoE Switch provides eight 1000 Mbps ports with a 120W power budget. It supports IEEE 802.3af/at standards, delivering up to 30W per port for connected devices. The unmanaged design requires no configuration, making it a plug-and-play solution. Its metal fanless case ensures quiet operation. This unit suits small offices or home networks needing reliable power and data over a single cable for cameras or access points.
Pros
- Eight ports all support PoE+ (802.3af/at)
- 120W total power budget with 30W per port limit
- 12 Gbps switching capacity for gigabit speeds
- Fanless metal design for silent operation
- Unmanaged plug-and-play setup with no configuration needed
Cons
- Limited to 8 ports, which is fewer than the 48-port option on this list
- Fixed 1000 Mbps speed, lacking the 2.5G or 10G options available in other variations
- No web management interface for monitoring or traffic control
Good fit if
- You need to power eight devices like cameras or APs without separate power outlets
- You want a quiet, fanless switch for a home or office environment
- You prefer a simple plug-and-play setup without software configuration
Skip if
- You require more than eight PoE ports for a larger deployment
- You need higher than gigabit speeds for data-intensive applications
- You want to monitor network traffic or manage ports remotely
Verdict: YuanLey 8-Port Gigabit PoE Switch is a straightforward, silent option for small setups requiring eight powered ports. It fits users who value simplicity and quiet operation over high port counts or advanced management features.
NICGIGA 48-Port Gigabit PoE+ Switch with 2 SFP
Best for: High-density PoE camera or AP networks
- Port Count
- 50
- Port Speed
- 10/100/1000 Mbps
- Management Type
- Unmanaged
- PoE Support
- PoE+ (IEEE 802.3af/at)
- PoE Power Budget
- 400W
- Uplink Ports
- 2 x 1G SFP
View on Amazon: NICGIGA 48-Port Gigabit PoE+ Switch with 2 SFP Affiliate link
This NICGIGA switch offers 50 total ports, including 48 PoE+ ports and two 1G SFP uplinks. It delivers a 400W power budget across Gigabit speeds. The unmanaged design requires no configuration, making it simple to deploy. Its metal shell and 4KV lightning protection suit industrial or outdoor-adjacent environments. You need this unit if you are powering many devices like IP cameras or access points without managing network traffic manually.
Pros
- 48 PoE+ ports with 400W total budget
- Two 1G SFP uplink ports
- 4KV lightning protection for stability
- Unmanaged plug-and-play operation
- Supports desktop or rack mounting
Cons
- Heavy 9.81-pound build
- Does not support passive PoE
- No web management interface
Good fit if
- You need to power dozens of PoE devices simultaneously
- You want a rugged switch with lightning protection
- You prefer simple plug-and-play networking
Skip if
- You require passive PoE support
- You need smart management features
- You have limited rack space for a 19-inch unit
Verdict: NICGIGA 50-Port Gigabit PoE Switch is a high-capacity unmanaged solution for users needing 400W of PoE power across 48 ports. It fits installations with many cameras or APs that do not require traffic management.
Specifications side by side
| Spec | YuanLey 8-Port Gigabit 120W PoE Switch | NICGIGA 48-Port Gigabit PoE+ Switch with 2 SFP |
|---|---|---|
| Port Count | 8 | 50 |
| Port Speed | 1000 Mbps | 10/100/1000 Mbps |
| Management Type | Unmanaged | Unmanaged |
| PoE Support | PoE+ (802.3af/at) | PoE+ (IEEE 802.3af/at) |
| PoE Power Budget | 120W | 400W |
| Uplink Ports | not stated | 2 x 1G SFP |
| Switching Capacity | 12 Gbps | not stated |
| Mounting Type | not stated | Desktop, Rackmount |
| Number of Ports | 8 Ports | 48 Ports |
| Uplink Port Type | not stated | SFP |
| Dimensions | 9.06 × 7.48 × 2.76 inches | not stated |
| Weight | 2.16 pounds | 9.81 pounds |
| Size | 8 Port | 8*PoE+ (120w) | not stated |
| Color | Black | Black |
| Model | 8 Port 1G PoE Unmanaged Switch (120W) | 50 Port | 48xPoE+ 400W+2xSFP |
Frequently asked questions
Can the NICGIGA 48-port switch fit in a standard equipment rack?
Yes, the NICGIGA model supports rackmount installation in addition to desktop placement. This dual-mounting option allows you to integrate the switch into server racks for organized cable management. The YuanLey unit is designed primarily for desktop use due to its smaller form factor and lack of rackmount specifications.
Does the YuanLey switch include SFP uplink ports for fiber connections?
No, the YuanLey 8-port model does not list SFP ports in its specifications. It relies entirely on its eight Gigabit Ethernet copper ports for connectivity. In contrast, the NICGIGA switch includes two Gigabit SFP uplink ports, providing flexibility for fiber optic connections or additional high-speed uplinks.
Which switch offers a higher total PoE power budget?
The NICGIGA switch provides a significantly higher power budget. It supports up to 400W across its 48 PoE+ ports. The YuanLey switch offers a 120W budget across its eight ports. You should choose the NICGIGA if you need to power many high-drain devices simultaneously, such as multiple PTZ cameras.
Is the YuanLey switch suitable for noise-sensitive environments like home offices?
Yes, the YuanLey switch is a silent, fanless option ideal for quiet spaces. Its compact design and lack of active cooling ensure it operates without audible noise. The larger NICGIGA switch is heavier and designed for high-density deployments, where noise is less of a concern than raw port capacity.
Do both switches require software configuration to function?
No, both switches are unmanaged and require no software configuration. You can plug devices directly into either switch for immediate plug-and-play operation. This simplicity makes both models suitable for users who want straightforward connectivity without navigating complex network settings or management interfaces.
Which switch is better for a network with many IP cameras?
The NICGIGA switch is better for high-density camera networks. It provides 48 PoE+ ports and a 400W budget, allowing you to connect dozens of cameras without needing additional power injectors. The YuanLey switch is limited to eight ports and 120W, making it suitable only for very small camera setups.
How much physical space does the YuanLey switch occupy?
The YuanLey switch measures 7.48 inches in width, 2.76 inches in height, and 9.06 inches in length. It weighs 2.16 pounds. These dimensions make it compact enough for desktop placement in homes or small offices. The NICGIGA switch is larger and heavier, weighing 9.81 pounds, requiring more space.