TP-Link TL-SG1218MP Review: 16 PoE+ Ports, 250W, SFP Uplinks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The TP-Link TL-SG1218MP is an 18-port rackmount switch: 16 Gigabit PoE+ (802.3at/af) ports at up to 30W each, two Gigabit non-PoE ports and two combo SFP slots for fiber uplinks. Its 250W total budget is one of the larger ones in this class; at a full 30W per port it runs about eight devices, and far more typical cameras or access points. It is plug-and-play, with port-based 802.1p/DSCP QoS and IGMP Snooping working automatically for video and voice. TP-Link describes a metal case with a heat dissipation design but does not say whether it has a fan. The 17.3-inch-wide chassis (1.73 inches tall, 5.2 pounds) fits a standard rack, and the warranty is three years. No VLANs or per-port PoE control are available. This review relies on the listing and specs rather than hands-on testing.
What stands out
- 250W PoE+ budget over 16 ports
- 2 combo SFP slots for fiber uplinks
- Plug-and-play QoS and IGMP Snooping
- Rackmount metal chassis
Who it fits
Good fit for
Camera systems, small offices and schools with 8-16 PoE devices in a rack, especially where the uplink needs fiber to another building or floor.
Who should skip it
Networks that need VLANs or PoE scheduling, setups that must be silent in a living space (fan status is not stated), and anyone needing multi-gig ports.
Verdict: Strong power and uplink options for a plug-and-play PoE switch; add a managed model if you need VLANs.
TL-SG1218MP key specs
16 x PoE+ 1 GbE, 30W each
Cameras, APs, phones and door stations.
250W total budget
Headroom for many PoE+ devices at once.
2 x 1 GbE non-PoE
Uplink to the router or an NVR.
2 x combo SFP
Fiber links to a distant switch.
802.1p/DSCP QoS, IGMP Snooping
Automatic help for video and voice.
17.3 x 7.09 x 1.73 in, 5.2 lb
1U-style rack chassis.
Design
A black metal rackmount chassis 17.3 inches wide and 1.73 inches tall, weighing 5.2 pounds. All 16 PoE+ ports, two uplinks and the two combo SFP slots sit on the front.
TP-Link mentions a heat dissipation design but not whether it uses a fan, so check before placing it in a quiet room.
Setup and daily use
Rack it, connect the router to a Gigabit uplink, and plug PoE devices into the 16 PoE+ ports. There is nothing to configure; QoS and IGMP Snooping are on by default.
Use an SFP module in a combo slot when the core switch or NVR sits beyond copper range.
TL-SG1218MP or NETGEAR GS324P?
Choose the TP-Link TL-SG1218MP if you need a big 250W budget and SFP fiber uplinks for a rack. Choose the NETGEAR GS324P if you want eight extra data ports and a listed fanless design, with a 190W budget. Choose a smart managed PoE switch if cameras must sit on their own VLAN.
Check before you buy
- 8-16 PoE devices
- PoE draw under 250W
- Rack space, 17.3 inches wide
- SFP modules if using fiber
The product at a glance
TP-Link 16-Port PoE+ Gigabit Switch
Best for: Rack-based camera and AP networks
- Port Count
- 18
- Port Speed
- 10/100/1000 Mbps
- PoE Support
- PoE+ (802.3at/af)
- PoE Power Budget
- 250W
- Uplink Ports
- 2 x Gigabit, 2 x Combo SFP
- Mounting Type
- Rack-mountable
View on Amazon: TP-Link 16-Port PoE+ Gigabit Switch Affiliate link
TP-Link TL-SG1218MP: 18-port rackmount switch with 16 Gigabit PoE+ ports on a 250W budget, two Gigabit uplinks and two combo SFP slots.
Pros
- Large 250W budget
- Fiber-capable uplinks
- 3-year warranty
Cons
- No VLANs or PoE control
- Fan status not stated
- Gigabit only
Good fit if
- You power many cameras or APs from a rack
Skip if
- You need managed VLANs
Verdict: Powerful unmanaged PoE+ rack switch.
Specifications side by side
| Spec | TP-Link 16-Port PoE+ Gigabit Switch |
|---|---|
| Port Count | 18 |
| Port Speed | 10/100/1000 Mbps |
| PoE Support | PoE+ (802.3at/af) |
| PoE Power Budget | 250W |
| Uplink Ports | 2 x Gigabit, 2 x Combo SFP |
| Mounting Type | Rack-mountable |
| Number of Ports | 16 Ports |
| Uplink Port Type | SFP |
| Dimensions | 17.3 × 7.09 × 1.73 inches |
| Weight | 5.2 pounds |
| Size | 18 Port w/ 16 PoE+ Port |
| Color | black |
| Model | TL-SG1218MP |
If you plan to power cameras from this switch's PoE+ ports, our guide to the best TP-Link security cameras compares the models side by side.
Frequently asked questions
How much PoE power does the TL-SG1218MP have?
250W in total, up to 30W per port.
Does the TL-SG1218MP have SFP ports?
Yes, two combo SFP slots.
Is the TL-SG1218MP managed?
No, it is plug and play with automatic QoS and IGMP Snooping.
How many non-PoE ports does it have?
Two Gigabit ports, plus the two combo SFP slots.
Is the TL-SG1218MP rack mountable?
Yes, it is a rack-mountable metal switch.
