As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

TP-Link TL-SF1005P Review: 5-Port 10/100 PoE+ Switch for Cameras

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The TP-Link TL-SF1005P is a 5-port Fast Ethernet switch: every port tops out at 100 Mbps, so it is not for PCs, a NAS or Wi-Fi access points. Where it fits is IP cameras and other low-bandwidth PoE devices. Four PoE+ ports (802.3af/at) supply up to 30W each from a 67W budget. Three camera-friendly features stand out. Extend Mode pushes data and power up to 250 m, at the cost of dropping the link to 10 Mbps. PoE Auto Recovery reboots a powered device that stops responding. Priority Mode on ports 1-2 favors video or voice traffic. The fanless metal case is about 3.93 x 3.86 x 0.98 inches, mounts on a desk or wall, and has a 3-year warranty. The Gigabit TL-SG1005P costs only a little more, so pick this one for the camera features, not the savings. Our review draws on the listing and specs; we have not tested it.

What stands out

  • Extend Mode up to 250 m (at 10 Mbps)
  • PoE Auto Recovery for frozen devices
  • Four PoE+ ports, 67W total
  • Tiny fanless metal case

Who it fits

Good fit for

Security camera installs, especially cameras at the far end of long cable runs past the usual 100 m limit, and VoIP phones.

Who should skip it

Anyone connecting PCs, a NAS, smart TVs or access points that need more than 100 Mbps.

Verdict: A purpose-built camera PoE switch; for general use, a Gigabit model is the better buy.

TL-SF1005P key specs

5 x 10/100 Mbps

Fast Ethernet, not Gigabit.

4 PoE+ ports, 30W each

Powers PTZ cameras and phones.

67W total budget

Shared across the four PoE ports.

Extend Mode, 250 m

Longer runs; link speed falls to 10 Mbps.

PoE Auto Recovery

Restarts unresponsive powered devices.

Priority Mode, ports 1-2

Keeps video or voice moving first.

Design

A palm-sized metal switch of about 3.93 x 3.86 x 0.98 inches and 8.47 ounces, with no fan. It sits on a desk or mounts on a wall, close to a camera junction or NVR.

PoE Auto Recovery is turned on with a button on the switch, and the listing mentions no software at all.

Setup and daily use

Plug in power and an uplink, then connect cameras to the PoE ports. Turn on Extend Mode only for ports with very long runs, since it slows them to 10 Mbps.

With Auto Recovery on, a camera that freezes is power-cycled automatically, which saves a ladder trip.

TL-SF1005P or a Gigabit PoE switch?

Choose the TP-Link TL-SF1005P if you are wiring cameras, especially on long runs, and want auto recovery. Choose the Gigabit TL-SG1005P or TL-SG1008P V4 if any device needs more than 100 Mbps, such as an access point or NVR uplink. Choose the TL-SG1218MP for a larger camera system with 16 PoE+ ports.

Check before you buy

  • Devices need 100 Mbps or less
  • Total PoE draw under 67W
  • Long cable runs to cameras
  • Uplink speed not critical

The product at a glance

TP-Link 5-Port Fast Ethernet PoE Switch

Best for: IP camera installs

Port Count
5
Port Speed
10/100 Mbps
PoE Support
PoE+ (802.3at/af)
PoE Power Budget
67W
Mounting Type
Desktop/wall-mounting
Number of Ports
5 Ports

View on Amazon: TP-Link 5-Port Fast Ethernet PoE Switch Affiliate link

TP-Link TL-SF1005P: 5-port 10/100 PoE+ switch, four 30W ports on a 67W budget, 250 m Extend Mode, PoE Auto Recovery, priority ports, fanless.

Pros

  • Camera-focused extras
  • PoE+ at 30W per port
  • Very small, fanless

Cons

  • 100 Mbps ports only
  • Extend Mode cuts to 10 Mbps
  • Gigabit model costs little more

Good fit if

  • You install PoE cameras on long runs

Skip if

  • You need Gigabit for PCs or APs

Verdict: Good camera switch, not a general one.

Specifications side by side

Spec TP-Link 5-Port Fast Ethernet PoE Switch
Port Count 5
Port Speed 10/100 Mbps
PoE Support PoE+ (802.3at/af)
PoE Power Budget 67W
Mounting Type Desktop/wall-mounting
Number of Ports 5 Ports
Dimensions 3.93 × 3.86 × 0.98 inches
Weight 8.47 ounces
Size 5 Port w/ 4-Port PoE+
Color 5-Port
Model TL-SF1005P

Frequently asked questions

Is the TL-SF1005P Gigabit?

No. It is Fast Ethernet, 10/100 Mbps on every port.

How far can the TL-SF1005P send PoE?

Up to 250 m in Extend Mode, with the link limited to 10 Mbps.

What does PoE Auto Recovery do?

It detects a powered device that stops responding and reboots it.

What is the TL-SF1005P power budget?

67W total, up to 30W per PoE+ port.

Can I use the TL-SF1005P for a Wi-Fi access point?

It will power one, but 100 Mbps ports will limit Wi-Fi speeds.

See also