LINOVISION POE-SW508G Review: 8-Port Industrial PoE++ DIN-Rail Switch
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The LINOVISION POE-SW508G is an industrial DIN-rail PoE switch for high-power devices: eight gigabit RJ45 PoE ports, of which ports 1-4 support IEEE 802.3bt at up to 90W each and ports 5-8 support 802.3af/at, plus two 1000Base-X SFP slots. Any PoE port can also serve as an uplink. The important catch is the power budget: the included UL-listed adapter gives 120W total, so only one 90W device can run at full draw with room to spare; LINOVISION's optional Mean Well 240W DIN-rail supply raises the budget to 240W. Dual 48-56V DC inputs allow a redundant supply, and the switch is listed as NDAA compliant. This review is based on LINOVISION's listing and specs; we did not test it.
What stands out
- Four 90W 802.3bt PoE++ ports
- Four more PoE+ ports, all gigabit
- Two gigabit SFP slots
- DIN rail, dual redundant DC inputs
Who it fits
Good fit for
Installers powering PTZ cameras, PoE lighting, PoE displays or outdoor access points from a control cabinet, where DIN mounting and redundant power matter.
Who should skip it
Home users with a few ordinary cameras, and anyone who expects four 90W devices to run on the included 120W adapter.
Verdict: A capable industrial PoE++ switch; budget for the 240W supply if you plan to use more than one 90W port at full power.
POE-SW508G specs, explained
Ports 1-4: 802.3bt, up to 90W
For PTZ cameras, PoE lighting and PoE monitors.
Ports 5-8: 802.3af/at
Standard PoE and PoE+ devices.
2 x 1000Base-X SFP
Fiber uplinks for long cabinet-to-building runs.
120W adapter; 240W with optional Mean Well supply
Total PoE budget depends on the supply you fit.
Dual 48-56V DC inputs
Redundant power if one supply fails.
5.91 x 3.94 x 1.25 in, DIN rail
Compact cabinet mount; NDAA compliant.
Build and power
The switch body is listed at 5.91 x 3.94 x 1.25 inches for DIN-rail mounting; the 3.33-pound weight likely includes the power adapter. Two DC input channels accept 48-56V, and the PoE output supports Mode A and Mode B pin assignments. The listing does not give an operating temperature range or a surge rating.
Setup and daily use
Clip the switch to a DIN rail, wire one or both DC inputs, and connect an SFP or copper port back to your network. Put the high-draw devices on ports 1-4. With the stock 120W adapter, add up the rated draw of everything before connecting: a single 90W PTZ camera leaves only about 30W for the other seven ports. Moving to the 240W supply makes two 90W devices plus several cameras workable.
POE-SW508G, BV-Tech POE-SW802-DIN or a desktop PoE+ switch?
Choose the LINOVISION POE-SW508G if you need 802.3bt ports for PTZ cameras or PoE lighting in a DIN cabinet. Choose BV-Tech's POE-SW802-DIN if 30W per port is enough and you want a wide -30 to +65 C rating; note its eight PoE ports are 100 Mbps. Choose a desktop PoE+ switch such as TP-Link's TL-SG1210MP if the switch sits indoors and no device needs more than 30W.
Check before you buy
- Total draw vs 120W, or the 240W supply
- Which devices need 802.3bt (ports 1-4)
- DIN rail and DC wiring in the cabinet
- SFP modules for fiber
The product at a glance
LINOVISION 8-Port Industrial Gigabit PoE++ Switch
Best for: PTZ cameras and PoE lighting
- Port Count
- 8
- Port Speed
- 10/100/1000Base-T
- PoE Support
- PoE++, PoE+
- PoE Power Budget
- 120W
- Uplink Ports
- 2 x Gigabit SFP
- Mounting Type
- DIN-Rail
View on Amazon: LINOVISION 8-Port Industrial Gigabit PoE++ Switch Affiliate link
LINOVISION POE-SW508G: industrial DIN-rail switch with four 90W 802.3bt ports, four PoE+ ports, two gigabit SFP slots and dual DC inputs.
Pros
- Four 90W PoE++ ports
- Two SFP uplinks
- Redundant DC inputs
Cons
- 120W adapter limits 90W use
- No temperature range listed
- No management listed
Good fit if
- You power PTZ cameras or PoE lighting from a cabinet
Skip if
- You only run standard PoE cameras indoors
Verdict: Strong industrial PoE++ switch once the power supply is sized.
Specifications side by side
| Spec | LINOVISION 8-Port Industrial Gigabit PoE++ Switch |
|---|---|
| Port Count | 8 |
| Port Speed | 10/100/1000Base-T |
| PoE Support | PoE++, PoE+ |
| PoE Power Budget | 120W |
| Uplink Ports | 2 x Gigabit SFP |
| Mounting Type | DIN-Rail |
| Number of Ports | 8 Ports |
| Dimensions | 5.91 × 3.94 × 1.25 inches |
| Weight | 3.33 pounds |
| Size | POE-SW508G |
| Color | black |
| Model | POE-SW508G |
Frequently asked questions
How many ports support 90W?
Ports 1-4 support 802.3bt at up to 90W each; ports 5-8 are 802.3af/at.
What is the PoE budget?
120W with the included adapter, 240W with the optional Mean Well DIN-rail supply.
Does it have SFP ports?
Yes, two 1000Base-X SFP slots.
Can it use redundant power?
Yes, it has two 48-56V DC input channels.
Is the POE-SW508G managed?
The listing describes no management features.
Featured in
See also
- vimin 18 port gigabit poe switch review
- yulinca 8 port 2 5g switch 10g sfp review
- davuaz 24 port poe switch 400w review
- best mesh wifi systems under 100
- best mesh wifi systems under 150
- Best Mesh Wifi Systems Under $200: 10 Spec-Based Picks
- 9 Best Mesh Wifi Systems Under $300, Compared
- Best Mesh Wifi Systems Under $500 in 2026: 8 Picks Ranked by Specs
- garveehome industrial dining table 6 8 review
- reolink 8 channel 5mp poe security review
