VIMIN 18-Port Gigabit PoE+ Switch Review: 250W, Rackmount
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The VIMIN 18-port PoE switch is an unmanaged 19-inch rackmount unit with sixteen gigabit PoE+ ports (802.3af/at, up to 30W each) and two gigabit uplink ports for the router and an NVR. The total PoE budget is 250W, which covers a 16-camera system with room to spare in most cases. A one-key VLAN mode isolates ports 1-16 from each other while they still reach the uplinks, a simple way to stop cameras talking to each other. VIMIN lists 4KV lightning protection, a metal case that sits on a desk or in a rack, a one-year warranty and lifetime technical support. It has no SFP slot and no management. We based this review on VIMIN's listing and specs, without testing.
What stands out
- Sixteen gigabit PoE+ ports
- 250W total PoE budget
- Two gigabit uplinks
- One-key VLAN port isolation
Who it fits
Good fit for
Security installers and small businesses running up to sixteen PoE cameras, phones or access points into an NVR from a rack.
Who should skip it
Anyone who needs fiber uplinks, managed VLANs or more than gigabit on the uplink for a busy 16-camera NVR.
Verdict: A good-value 16-port PoE+ rack switch for camera systems; check the uplink plan if many high-bitrate cameras share one gigabit link.
VIMIN 18-port specs, explained
16 x gigabit PoE+ (802.3af/at)
Cameras, phones and APs get power and data on one cable.
30W per port, 250W total
About eight devices at the full 30W, or sixteen at lower draw.
2 x gigabit uplinks
One to the router, one to the NVR.
One-key VLAN mode
Ports 1-16 cannot see each other; uplinks reach all.
4KV lightning protection
Some defence against surges on long cable runs.
19-inch metal case, 4.59 lb
Rack or desktop.
Build
A metal 19-inch case that can go on a desk or in a rack, listed at 4.59 pounds; the listing gives no dimensions or fan details. VIMIN backs it with one year of warranty and lifetime technical support.
Setup and daily use
Rack it, link an uplink to the router and the other to the NVR, and plug cameras into ports 1-16. Turn on the one-key VLAN switch to isolate the camera ports from each other; the NVR and router on the uplinks still see them all. Keep in mind that all sixteen ports share gigabit uplinks, which suits most camera systems but can become tight with many high-bitrate 4K cameras.
VIMIN 18-port, NICGIGA 18-port, WAVLINK 18-port or TP-Link TL-SG116P?
Choose the VIMIN if you want sixteen gigabit PoE+ ports, 250W and one-key VLAN in a rackmount case with a stated one-year warranty. Choose NICGIGA's 18-port PoE+ switch if you want the same 16+2 layout, 250W and one-key VLAN for slightly less; its listing reads almost word for word like this one. Choose WAVLINK's 18-port model if you want two gigabit SFP uplinks for fiber instead of copper. Choose TP-Link's TL-SG116P if you prefer a big-brand desktop switch with sixteen PoE+ ports; its 120W budget suits lower-draw cameras only.
Check before you buy
- Total draw within 250W
- Rack space (19-inch)
- NVR on one uplink
- No fiber needed (no SFP)
The product at a glance
VIMIN 18-Port Gigabit PoE+ Rackmount Switch
Best for: 16-camera NVR systems
- Port Count
- 18
- Port Speed
- Gigabit
- Management Type
- Unmanaged
- PoE Support
- PoE+ (IEEE 802.3af/at)
- PoE Power Budget
- 250W
- Uplink Ports
- 2 x Gigabit
View on Amazon: VIMIN 18-Port Gigabit PoE+ Rackmount Switch Affiliate link
VIMIN 18-port PoE switch: sixteen gigabit PoE+ ports with a 250W budget, two gigabit uplinks, one-key VLAN and a 19-inch rack case.
Pros
- 250W across sixteen PoE+ ports
- One-key VLAN isolation
- Rack or desktop metal case
Cons
- No SFP uplink
- Unmanaged
- Dimensions not listed
Good fit if
- You run a 16-camera NVR system
Skip if
- You need fiber or managed VLANs
Verdict: Solid value for 16-camera PoE systems.
Specifications side by side
| Spec | VIMIN 18-Port Gigabit PoE+ Rackmount Switch |
|---|---|
| Port Count | 18 |
| Port Speed | Gigabit |
| Management Type | Unmanaged |
| PoE Support | PoE+ (IEEE 802.3af/at) |
| PoE Power Budget | 250W |
| Uplink Ports | 2 x Gigabit |
| Mounting Type | Desktop, Rack-Mount |
| Number of Ports | 18 Ports |
| Weight | 4.59 pounds |
| Size | 18 Port Gigabit PoE Switch |
| Color | black |
| Model | 18 Port | 16xPoE + 250W | 2xUPLink |
Frequently asked questions
How many PoE ports does the VIMIN 18-port switch have?
Sixteen gigabit PoE+ ports; the two uplinks have no PoE.
What is its PoE budget?
Sixteen ports share 250W; a single port tops out at 30W.
What does the one-key VLAN do?
It isolates ports 1-16 from each other while they still communicate with the uplink ports.
Can it be rack mounted?
Yes, it is a 19-inch rackmount metal unit that can also sit on a desk.
Can the uplinks take fiber?
No. Both uplinks are gigabit RJ45; WAVLINK's 18-port model has SFP uplinks.
See also
- yulinca 8 port 2 5g switch 10g sfp review
- davuaz 24 port poe switch 400w review
- qnap qsw 3216r 8s8t 10gbe switch review
- best mesh wifi systems under 100
- best mesh wifi systems under 150
- Best Mesh Wifi Systems Under $200: 10 Spec-Based Picks
- 9 Best Mesh Wifi Systems Under $300, Compared
- Best Mesh Wifi Systems Under $500 in 2026: 8 Picks Ranked by Specs
- annke 16 channel 12mp poe camera review
- reolink 16 channel 12mp poe camera review
