YuanLey 10-Port Fast Ethernet PoE+ Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This yuanley 8 port poe switch review covers a compact networking device designed for small-scale deployments. It features ten ports in total: eight PoE+ ports for connecting devices like IP cameras, and two Gigabit uplink ports for higher bandwidth connections to your router or NVR. The unit provides a 120W power budget, allowing you to power multiple 802.3af/at devices simultaneously. As an unmanaged switch, it requires no configuration, making it a straightforward plug-and-play solution for basic network expansion needs.
What stands out
- Eight 10/100 Mbps PoE+ ports with a 120W total power budget
- Two Gigabit uplink ports for high-speed data backhaul
- Unmanaged design with plug-and-play simplicity
- VLAN isolation support for improved network security
- 250m transmission distance in extend mode
Who it fits
Good fit for
This switch suits users setting up small security camera systems or wireless access point networks who need reliable power delivery without complex configuration. The two Gigabit uplinks make it ideal for connecting to a main router or network video recorder, ensuring that video data does not bottleneck on the slower PoE ports. If you need VLAN isolation to separate traffic or plan to use the extend mode for longer cable runs, this unmanaged unit offers those features directly in the hardware.
Who should skip it
Skip this model if you require Gigabit speeds on all connected devices, as the PoE ports are limited to 100 Mbps. You should also avoid it if you need managed features like remote monitoring, QoS controls, or SNMP support, since this is a strictly unmanaged switch. Additionally, do not use it for devices requiring 24V passive PoE, as it only supports the standard IEEE 802.3af/at 48V protocol. Users needing more than eight powered ports should look at the larger 18 or 26-port variations.
Verdict: The YuanLey 10-Port switch is a practical, no-frills solution for small networks needing PoE power and basic VLAN features. It works well for simple camera installations but lacks the speed and management options for larger or more complex setups.
Key specs explained for buyers
Port Count: 10
This switch provides ten physical connections for your network devices. You get eight ports dedicated to PoE+ power delivery and two separate Gigabit uplink ports. This layout lets you connect multiple cameras or access points while keeping high-bandwidth traffic for your router or network video recorder separate. It suits small offices or homes with moderate device counts.
PoE Support: PoE+ (802.3af/at)
The device supports the 802.3af and 802.3at standards, delivering up to 30 watts per port. This covers most IP cameras, wireless access points, and VoIP phones. It does not support 24V passive PoE, so verify your device requirements before buying. This standard ensures compatibility with widely available networking gear without needing extra power adapters.
PoE Power Budget: 120W
The total power available across all eight PoE ports is 120 watts. You cannot run every port at maximum 30 watts simultaneously. The switch distributes this budget based on what each connected device actually draws. This is sufficient for typical camera setups but may limit you if you plan to power high-drain devices like PTZ cameras on all ports at once.
Management Type: Unmanaged
This is a plug-and-play device with no software interface or configuration portal. It automatically detects connected devices and starts forwarding data immediately. This makes installation simple for users who do not want to deal with VLANs, QoS, or port settings. It is ideal for straightforward setups where you just want power and connectivity without administrative overhead.
Uplink Ports: 2 x Gigabit
Two ports offer 1000 Mbps speeds, distinct from the 100 Mbps PoE ports. These are designed to connect to your main router, switch, or network video recorder. Using Gigabit uplinks prevents bottlenecks when transferring large video files or high-resolution streams. This ensures your core network traffic remains fast even if the PoE ports are limited to Fast Ethernet speeds.
Design and Build Details
The YuanLey 10-Port Fast Ethernet PoE+ Switch features a compact metal enclosure. According to the listing, the chassis measures 7.9 inches in length, 4.7 inches in width, and 1.7 inches in height. It weighs 2.12 pounds. The metal construction aids in heat dissipation, which is important for a device that delivers power continuously. The blue finish is standard for this type of networking hardware. You can mount it in tight spaces, such as inside a ceiling cavity or behind a monitor, thanks to its small footprint.
The layout is straightforward. Eight ports on the front provide 10/100 Mbps Fast Ethernet speeds for PoE+ devices. Two Gigabit uplink ports are located on the side or rear to handle higher bandwidth traffic. There are no buttons or screens. The switch is unmanaged and plug-and-play. You simply connect the power cord and network cables. LED indicators show status. This simple design means you do not need to configure settings. It is ideal for users who want a reliable, no-fuss connection for security cameras or access points without dealing with complex network management software.
Setup and everyday use guide
This switch is an unmanaged device, which simplifies your initial setup. You do not need to configure IP addresses or manage VLANs through a web interface. The listing describes it as a plug-and-play unit. You simply connect the power cord and attach your network cables. The hardware automatically detects connected devices. This approach removes configuration barriers for users who prefer straightforward installations.
Daily operation relies on the 120W power budget. The switch supports IEEE 802.3af and 802.3at standards. Each of the eight PoE ports can deliver up to 30W. This capacity handles standard PoE+ devices like IP cameras and wireless access points. You must verify compatibility if your equipment uses 24V passive PoE. The listed 48V active PoE ports will not work with passive devices.
For network management, ports one through eight support VLAN isolation. You can use this feature to reduce congestion and improve security by segmenting traffic. If you enable the extend mode, a single PoE port supports transmission distances up to 250 meters. Note that this extended range limits speed to 10Mbps. The two Gigabit uplink ports handle higher bandwidth connections to your router or network video recorder. The metal casing provides bilateral heat dissipation, which helps maintain stable performance during continuous use. LED indicators provide visual status updates for your connections.
Before You Buy This Switch
You need to verify your devices use standard 802.3af/at PoE+. This unit does not support 24V passive PoE. Connecting incompatible devices may cause damage or failure. Check your camera or access point specifications carefully. You will also need Cat5e or Cat6 cabling for the 10/100 Mbps ports. Gigabit uplinks handle higher bandwidth, but edge ports remain fast Ethernet. Keep the metal enclosure clear for heat dissipation. Dust accumulation can reduce cooling efficiency. Clean vents periodically. This switch fits small setups with few cameras. It lacks advanced management features found in larger models. If you need VLAN isolation, this unit supports it on ports one through eight. You must enable extend mode for longer distances. Speed drops to 10 Mbps at 250 meters. Consider if your network requires managed features. This unmanaged device suits basic deployments. It does not replace a full mesh WiFi system. Use it to power wired endpoints in your home network.
Check before you buy
- Confirm devices use standard 802.3af/at PoE power
- Verify cables are Cat5e or better for speed
- Check if managed features are necessary for your setup
- Ensure adequate airflow around the metal enclosure
The product at a glance
YuanLey 10-Port Fast Ethernet PoE+ Switch
Best for: small IP camera installations with VLAN needs
- Port Count
- 10
- Port Speed
- 10/100 Mbps
- Management Type
- Unmanaged
- PoE Support
- PoE+ (802.3af/at)
- PoE Power Budget
- 120W
- Uplink Ports
- 2 x Gigabit
View on Amazon: YuanLey 10-Port Fast Ethernet PoE+ Switch Affiliate link
This unmanaged switch offers eight 10/100 Mbps PoE+ ports with a 120W budget. It includes two gigabit uplink ports for higher bandwidth connections. The metal case provides durable housing with bilateral heat dissipation. You can enable VLAN isolation on ports 1-8 to reduce congestion. The extend mode allows 250m transmission at 10Mbps. It is designed for IP cameras and wireless access points.
Pros
- 120W PoE+ power budget supports up to 30W per port
- Two gigabit uplink ports provide faster backhaul than the PoE ports
- VLAN isolation on ports 1-8 improves network safety
- Metal chassis with bilateral heat dissipation for durability
Cons
- PoE ports are limited to 10/100 Mbps speeds
- Unmanaged design restricts advanced configuration options
- Does not support 24V passive PoE devices
Good fit if
- You need a simple plug-and-play setup for IP cameras
- You require VLAN isolation for basic network segmentation
- You have devices that use standard 802.3af/at PoE
Skip if
- You need gigabit speeds on all PoE ports
- You require remote management or SNMP support
- You use 24V passive PoE devices
Verdict: YuanLey 8-Port PoE Switch is a practical choice for small setups needing basic VLAN isolation and gigabit uplinks, but it lacks the speed and management features for larger networks.
Specifications side by side
| Spec | YuanLey 10-Port Fast Ethernet PoE+ Switch |
|---|---|
| Port Count | 10 |
| Port Speed | 10/100 Mbps |
| Management Type | Unmanaged |
| PoE Support | PoE+ (802.3af/at) |
| PoE Power Budget | 120W |
| Uplink Ports | 2 x Gigabit |
| Number of Ports | 10 Ports |
| Uplink Port Type | Gigabit Uplink |
| Dimensions | 7.9 × 4.7 × 1.7 inches |
| Weight | 2.12 pounds |
| Size | 10 Port | 8*PoE+ (120w) |
| Color | Blue |
| Model | 10 Port | 8*PoE+ (120w) |
Frequently asked questions
Is the YuanLey 10-Port switch managed or unmanaged?
It is an unmanaged device. You do not need to configure IP addresses or manage VLANs through a web interface. The listing describes it as a plug-and-play unit. You simply connect the power cord and network cables to get started without complex setup steps.
What is the total PoE budget for this switch?
The total PoE budget is 120 watts. This power is distributed across the eight PoE+ ports. This budget supports standard 802.3af/at devices like IP cameras. It does not support 24V passive PoE, so you must verify your device compatibility to avoid damage.
Does this switch support gigabit speeds for data?
Yes, it supports gigabit speeds on the uplink ports. The two dedicated uplink ports provide higher bandwidth for your router or NVR. The other ports operate at fast ethernet speeds. This mix allows for efficient data transfer while keeping power delivery consistent for connected devices.
How big is the YuanLey 10-Port PoE switch?
The chassis measures 7.9 inches in length, 4.7 inches in width, and 1.7 inches in height. It weighs 2.12 pounds. The compact metal enclosure aids in heat dissipation. This size makes it suitable for small installations where space is limited but reliability is key.
Can I use this switch for VLAN isolation?
The device is unmanaged, so it lacks advanced VLAN configuration features. However, it is noted as a practical choice for small setups needing basic VLAN isolation. You rely on the hardware separation of ports rather than software-defined network segments for your security and organization needs.
What type of network cables do I need?
You will need Cat5e or better cables for optimal performance. These cables support the gigabit uplink speeds and fast ethernet connections. Ensure your cables are in good condition to maintain stable power delivery and data transmission for your connected IP cameras and access points.
Is this switch suitable for large networks?
No, it lacks the speed and management features for larger networks. It is designed for small IP camera installations with basic needs. If you require advanced management or higher throughput, this unit may not meet your requirements. It is best for compact, straightforward deployments.