WAVLINK NW2422GP Review: 28-Port Gigabit Switch With 24 PoE+ Ports at 250W
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The WAVLINK NW2422GP is a 28-port unmanaged gigabit switch: 24 802.3af/at PoE+ ports (up to 30 W each), two RJ45 uplinks and two independent SFP ports for fiber. The power supply is built in and the PoE budget is 250 W in total, which averages about 10.4 W per port when all 24 draw power: fine for fixed cameras and VoIP phones, tight for a full set of Wi-Fi 6 access points. Four modes cover the common needs without a web interface: VLAN (port isolation), Extend (longer runs), PD-Alive (restarts devices that stop responding) and LAG (bonding uplinks). A fan and side vents handle cooling, and it mounts on a desk or in a rack. For a 24-camera NVR system with a fiber link to another building, it fits well. Written from the listing and specs; we did not test it.
What stands out
- 24 gigabit PoE+ ports
- Two SFP fiber uplinks
- PD-Alive and LAG modes
- Built-in power supply, rack mount
Who it fits
Good fit for
Security installers and small businesses running up to two dozen IP cameras or VoIP phones, especially with a fiber run to an NVR or another building.
Who should skip it
Anyone powering many high-draw devices (24 x 30 W far exceeds 250 W), anyone who needs per-port control, or a quiet office: it has a fan.
Verdict: A solid unmanaged 24-port PoE+ switch with fiber uplinks; the 250 W budget sets how many power-hungry devices it can carry.
NW2422GP key specs
24 x gigabit PoE+
802.3af/at, up to 30 W on any one port.
250 W total
About 10.4 W average across all 24 ports.
2 x SFP + 2 x RJ45 uplinks
Fiber for long runs, copper for the router or NVR.
VLAN, Extend, PD-Alive, LAG
Preset modes instead of a web interface.
Built-in power supply
No external brick.
Fan, desktop or rack
Active cooling with side vents.
Chassis and cooling
A metal case with vents on both sides and a cooling fan, for desktop or rack mounting. LED indicators show port status. The listing gives no dimensions, weight or SFP speed beyond the gigabit claim, and does not say if rack ears are included.
The power supply is internal, so only an AC cord runs to it.
Daily operation
Cameras and phones are detected and powered on connection. Turn on PD-Alive if a camera occasionally freezes, VLAN mode to keep camera ports apart, and LAG mode if you bond the two uplinks to a switch that supports it.
Add up your devices' rated draw: twelve 20 W access points would already reach 240 W.
WAVLINK NW2422GP, Ztyuav 18-Port or NETGEAR GS324P?
Choose the WAVLINK NW2422GP if you need twenty-four PoE+ ports plus SFP fiber uplinks. Choose the Ztyuav 18-Port if sixteen PoE+ ports on the same 250 W budget are enough; it costs far less and is fanless. Choose the NETGEAR GS324P if you want a 24-port NETGEAR unit where 16 of the ports carry PoE.
Check before you buy
- Total draw under 250 W
- SFP modules for fiber runs
- Rack space and airflow
- Fan noise acceptable
The product at a glance
WAVLINK 28-Port Gigabit PoE Switch
Best for: 24-camera NVR systems
- Port Count
- 28
- Management Type
- Unmanaged
- PoE Support
- PoE+ (802.3af/at)
- PoE Power Budget
- 250W
- Uplink Ports
- 2 x SFP, 2 x Gigabit Ethernet
- Mounting Type
- Desktop, Rackmount
View on Amazon: WAVLINK 28-Port Gigabit PoE Switch Affiliate link
WAVLINK NW2422GP: unmanaged 28-port gigabit switch with 24 PoE+ ports on 250 W, 2 SFP and 2 RJ45 uplinks, and VLAN, Extend, PD-Alive and LAG modes.
Pros
- 24 PoE+ ports
- SFP fiber uplinks
- PD-Alive restarts hung devices
Cons
- 250 W limits full loads
- Fan noise
- No size listed
Good fit if
- You run a large camera system
Skip if
- Your devices need 30 W each
Verdict: Plenty of PoE ports with fiber uplinks.
Specifications side by side
| Spec | WAVLINK 28-Port Gigabit PoE Switch |
|---|---|
| Port Count | 28 |
| Management Type | Unmanaged |
| PoE Support | PoE+ (802.3af/at) |
| PoE Power Budget | 250W |
| Uplink Ports | 2 x SFP, 2 x Gigabit Ethernet |
| Mounting Type | Desktop, Rackmount |
| Port Speed | Gigabit |
| Size | 28 Port |
| Color | PoE |
| Model | NW2422GP |
Frequently asked questions
How many PoE ports does the NW2422GP have?
Twenty-four PoE+ ports, plus two RJ45 uplinks and two SFP ports.
How much PoE power can the NW2422GP supply?
250 W in total, with up to 30 W on any single port.
What does PD-Alive mode do?
It keeps powered devices online by restarting ones that stop responding.
Does the NW2422GP have a fan?
Yes, a cooling fan with side vents.
Is the WAVLINK NW2422GP managed?
No. It is unmanaged with four preset modes: VLAN, Extend, PD-Alive and LAG.
See also
- sinotchous 6 port gigabit poe switch review
- hgcorenet 5 port gigabit switch review
- edimax ew 7438rpn mini n300 universal review
- best mesh wifi systems under 100
- best mesh wifi systems under 150
- Best Mesh Wifi Systems Under $200: 10 Spec-Based Picks
- 9 Best Mesh Wifi Systems Under $300, Compared
- Best Mesh Wifi Systems Under $500 in 2026: 8 Picks Ranked by Specs
- temprium 28 review
- tesmart 4 port kvm switch dual monitor review
