VSVABEFV AP240 Dual-Band Ceiling Access Point Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The VSVABEFV AP240 is a ceiling-mount Wi-Fi 5 access point rated at 300 Mbps on 2.4 GHz plus a stated 900 Mbps on 5 GHz (an AC1200-class radio on an MTK chipset), for 80+ users. It takes power three ways: 802.3af PoE (the listing calls it PoE+, which 802.3af is not), 48V passive PoE, or the included 12V/1A adapter. It runs standalone (FAT) or under a Yunlink WLAN controller (FIT) and offers roaming, beamforming, MU-MIMO and a captive portal with Google, SMS, Facebook or member logins. A hardware watchdog, lightning and ESD protection round it out. The default Wi-Fi key (66666666) and admin password are printed in the listing, so change both at setup. At its low price it undercuts Wi-Fi 6 units such as NETGEAR's WAX210PA. We compared it on VSVABEFV's listing and published specs, without testing it.
What stands out
- Three power options incl. 12V adapter
- FIT/FAT controller or standalone
- Captive portal logins
- Watchdog and surge protection
Who it fits
Good fit for
Small shops, rentals or dorms that want cheap ceiling Wi-Fi with a guest login page.
Who should skip it
Homes wanting Wi-Fi 6, WPA3 or a polished app; NETGEAR's WAX210PA or Omada units fit better.
Verdict: Cheap, flexible ceiling AP for basic guest Wi-Fi; Wi-Fi 5 only.
VSVABEFV AP240 key specs
300 + 900 Mbps, 802.11ac
AC1200-class Wi-Fi 5.
802.3af / 48V passive / 12V DC
Adapter included.
FIT/FAT modes
Controller-managed or standalone.
80+ users
Seller figure.
Captive portal
Google/SMS/Facebook/member login.
192.168.188.253
Default management address.
Design
The AP240 is a slim white ABS ceiling disc; listed dimensions of 11.5 x 7.6 x 2.3 in and 1.1 lb likely describe the box. The board has a watchdog that reboots after a fault, plus lightning and ESD protection.
The 12V adapter lets you mount it where no PoE switch exists, though a single cable is neater.
Setup and use
Join its Wi-Fi with key 66666666, open 192.168.188.253 and log in with "admin"; set a new key and password first. Several units can be managed together from a Yunlink controller, which pushes SSID, channel and firmware.
The portal options suit cafes or rentals; for a home, standalone mode with one SSID is enough.
VSVABEFV AP240, NETGEAR WAX210PA or Omada EAP225-Outdoor?
Choose the AP240 for the lowest-cost ceiling AP with a guest portal and flexible power. Choose the NETGEAR WAX210PA for Wi-Fi 6, WPA3 and four SSIDs with simple browser setup. Choose the Omada EAP225-Outdoor if the access point must sit outside; it is AC1200 with a PoE injector.
Check before you buy
- Change default key and password
- PoE switch or 12V outlet
- Ceiling mounting point
- Controller only if several units
The product at a glance
VSVABEFV Dual-Band Gigabit PoE Access Point
Best for: Budget ceiling AP with portal
- Wi-Fi Standard
- 802.11ac
- Speed Rating
- 1200Mbps
- Frequency Band
- Dual-Band (2.4 GHz, 5.8 GHz)
- PoE Support
- 802.3af PoE+, 48V Passive PoE
- Operating Mode
- Access Point, Repeater, Mesh
- Ethernet Port Speed
- Gigabit
View on Amazon: VSVABEFV Dual-Band Gigabit PoE Access Point Affiliate link
VSVABEFV AP240: AC1200 ceiling access point with PoE or 12V power, FIT/FAT modes and a captive portal.
Pros
- Flexible power
- Guest portal
- Low price
Cons
- Wi-Fi 5 only
- Default password printed publicly
- "PoE+" label is 802.3af
Good fit if
- You need cheap guest Wi-Fi
Skip if
- You want Wi-Fi 6
Verdict: Good-value basic ceiling AP.
Specifications side by side
| Spec | VSVABEFV Dual-Band Gigabit PoE Access Point |
|---|---|
| Wi-Fi Standard | 802.11ac |
| Speed Rating | 1200Mbps |
| Frequency Band | Dual-Band (2.4 GHz, 5.8 GHz) |
| PoE Support | 802.3af PoE+, 48V Passive PoE |
| Operating Mode | Access Point, Repeater, Mesh |
| Ethernet Port Speed | Gigabit |
| Features | MU-MIMO, Mesh, Seamless Roaming |
| Port Speed | Gigabit |
| Dimensions | 11.5 × 7.6 × 2.3 inches |
| Weight | 1.1 pounds |
| Size | Compact |
| Color | Dual-band Gigabit 1200Mbps |
| Model | AP240 |
Frequently asked questions
How is the AP240 powered?
By 802.3af PoE, 48V passive PoE or the included 12V/1A adapter.
What is the AP240's default login?
Wi-Fi key 66666666, then 192.168.188.253 with password admin.
Does the AP240 support Wi-Fi 6?
No, it is an 802.11ac Wi-Fi 5 access point.
Can several AP240 units be managed together?
Yes, under a Yunlink WLAN controller in FIT mode.
Does it support guest logins?
Yes, a captive portal with Google, SMS, Facebook or member login.
Featured in
See also
- cudy ap3000 outdoor wifi 6 access point review
- netgear wax210pa wifi 6 access point review
- cinamon outdoor wifi extender ax1800 review
- best mesh wifi systems under 100
- best mesh wifi systems under 150
- Best Mesh Wifi Systems Under $200: 10 Spec-Based Picks
- 9 Best Mesh Wifi Systems Under $300, Compared
- Best Mesh Wifi Systems Under $500 in 2026: 8 Picks Ranked by Specs
- waveshare gigabit 2 5g dual review
- annke 4k dual lens poe system review
