As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

HRLNNFO 6-Antenna 300 Mbps Wi-Fi Repeater Review: 2.4 GHz Only

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The HRLNNFO repeater is a single-band unit: it relays 2.4 GHz Wi-Fi at up to 300 Mbps through six external antennas, with an Ethernet port and a choice of repeater or access point (AP) mode. In AP mode you run a cable from the router and it broadcasts a fresh signal, which is usually the faster setup. The listing is short, with two feature lines, so device count, security, size and setup steps are all missing. Its 9,998 sq ft coverage figure is not credible for a plug-in repeater. At its price, a dual-band TP-Link RE220 (AC750, Ethernet port) costs less and adds 5 GHz, so the HRLNNFO makes sense mainly if you like its antenna layout. We relied on the listing and published specs, without hands-on time.

What stands out

  • 300 Mbps on 2.4 GHz
  • 6 external antennas
  • Ethernet port
  • Repeater and AP modes

Who it fits

Good fit for

Homes that only need to reach 2.4 GHz devices (cameras, plugs, a printer) one room further.

Who should skip it

Anyone streaming or gaming over Wi-Fi; a dual-band extender adds 5 GHz for less money.

Verdict: Basic 2.4 GHz repeater with an AP mode; overpriced against dual-band rivals.

HRLNNFO key specs

2.4 GHz, 300 Mbps

No 5 GHz band.

6 external antennas

No gain figure listed.

Ethernet port

Wired client or AP uplink.

Repeater / AP mode

AP mode needs a cable from the router.

9,998 sq ft claim

Unrealistic for a 2.4 GHz plug-in.

Devices, security, size

Not listed.

Design

Six antennas fan out from a white plug-in body; the listing gives no dimensions, so check that it will not block a second outlet.

The Ethernet port does double duty: a wired TV or console in repeater mode, or the uplink cable in AP mode.

Setup and use

The listing promises easy setup but gives no method; expect WPS pairing or a browser page, as on similar repeaters. In repeater mode, place it where the router's 2.4 GHz signal is still decent.

If a cable can reach the far room, AP mode avoids the speed loss of wireless repeating.

HRLNNFO, TP-Link RE220 or RE105?

Choose the HRLNNFO for six antennas and an AP mode on a 2.4 GHz network. Choose the TP-Link RE220 (dual-band AC750, Ethernet port) for 5 GHz support at a lower price. Choose the TP-Link RE105 (N300, single band) if you only need a branded 2.4 GHz repeater and want to spend less.

Check before you buy

  • Devices that use 2.4 GHz
  • Outlet with space for six antennas
  • Cable path if using AP mode
  • Return window checked

The product at a glance

HRLNNFO 6-Antenna 300 Mbps Repeater

Best for: Reaching 2.4 GHz smart devices

Speed Rating
300 Mbps
Frequency Bands
2.4GHz
Coverage Area
9998 Sq.ft.
Operating Modes
Repeater, AP
Antenna Count
6
Intended Use
Home

View on Amazon: HRLNNFO 6-Antenna 300 Mbps Repeater Affiliate link

HRLNNFO: six-antenna 2.4 GHz 300 Mbps repeater with an Ethernet port and repeater/AP modes; very short listing.

Pros

  • AP mode
  • Ethernet port
  • Six antennas

Cons

  • 2.4 GHz only
  • Dual-band rivals cost less
  • Few specs listed

Good fit if

  • You only need 2.4 GHz devices covered

Skip if

  • You stream or game over Wi-Fi

Verdict: Works for 2.4 GHz gear; poor value.

Specifications side by side

Spec HRLNNFO 6-Antenna 300 Mbps Repeater
Speed Rating 300 Mbps
Frequency Bands 2.4GHz
Coverage Area 9998 Sq.ft.
Operating Modes Repeater, AP
Antenna Count 6
Intended Use Home
Operating Mode Access Point Mode
Color White

Frequently asked questions

Does the HRLNNFO repeater support 5 GHz?

No, it works on 2.4 GHz at up to 300 Mbps.

What does AP mode do on the HRLNNFO?

It takes a wired feed from the router and broadcasts Wi-Fi from that spot.

How many clients will the HRLNNFO handle?

HRLNNFO gives no device count.

Is 9,998 sq ft realistic?

No; a 2.4 GHz repeater adds roughly a room or two.

Can a cable go into the HRLNNFO?

Yes, one Ethernet port takes a wired client or the AP uplink.

See also