HOLACA Wall Mount for ASUS ZenWiFi XT8 Review: Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The HOLACA wall mount is a single bracket made for ASUS ZenWiFi AX nodes: the XT8 and CT8, with the title adding the XT9. It screws to any vertical surface and holds one node, so you can lift it above furniture where its signal travels more freely. A screw set comes in the box, the router does not, and it cost under $20 when we checked. Our verdict: a cheap, tidy way to wall-mount a ZenWiFi XT8, but check the fit for your model given the seller's note about reworked stock. We read the listing and did not fit one ourselves.
What stands out
- Made for ZenWiFi XT8, CT8 (and XT9 per the title)
- Screws to any vertical surface
- Screw set included
- One bracket per pack
Who it fits
Good fit for
Owners of ZenWiFi XT8 or CT8 nodes who want them on a wall instead of a shelf.
Who should skip it
Owners of other ZenWiFi models, and renters who cannot drill.
Verdict: A cheap, purpose-made bracket for XT8 owners.
HOLACA mount details, explained
Fits XT8 / CT8 / XT9
Shaped for these ASUS ZenWiFi AX nodes only.
Wall mount
Fixes to a vertical surface with the included screws.
1 pack, white
One bracket; buy one per node you want to mount.
Device not included
The router is sold separately.
Design and fit
The listing describes it as compact, light and plain, so it should blend in under a white node. One listing line says earlier stock was withdrawn after customer comments and that current stock is a newly shipped version for the XT8, CT8 and XT9. That suggests the fit was revised, so compare the shape with your node before installing.
Installing and using it
Mark the spot, screw the bracket to the wall, then set the node in place. Mounting a node higher, and away from metal shelves or TVs, gives its signal a clearer path to nearby rooms.
Leave room for the power lead and any Ethernet cable at the back of the node.
Before you buy the HOLACA mount
Choose the HOLACA bracket if you own a ZenWiFi XT8 or CT8 and can drill into the wall. Choose an outlet-style holder instead, such as the Tizomi mount for eero 6, if your system is an eero 6 and you would rather not drill.
Check before you buy
- You own an XT8, CT8 or XT9 node
- Drilling into the wall is allowed
- One bracket per node
- Power outlet within cable reach
The product at a glance
HOLACA ZenWiFi AX Wall Mount
Best for: ZenWiFi XT8 owners
- Wi-Fi Standard
- Wi-Fi 6
- Frequency Band
- Tri-Band
- Pack Size
- 1-Pack
- Features
- Mesh
- Mounting Type
- Wall Mount
- Intended Use
- Home
View on Amazon: HOLACA ZenWiFi AX Wall Mount Affiliate link
HOLACA wall mount: a screw-on bracket for one ASUS ZenWiFi XT8, CT8 or XT9 node, screws included, under $20.
Pros
- Shaped for ZenWiFi XT8/CT8
- Screws included
- Low cost
Cons
- One bracket per pack
- Needs drilling
Good fit if
- You want an XT8 node on the wall
Skip if
- You cannot drill or own another model
Verdict: A simple fix for XT8 placement.
Specifications side by side
| Spec | HOLACA ZenWiFi AX Wall Mount |
|---|---|
| Wi-Fi Standard | Wi-Fi 6 |
| Frequency Band | Tri-Band |
| Pack Size | 1-Pack |
| Features | Mesh |
| Mounting Type | Wall Mount |
| Intended Use | Home |
| Size | 1 Pack |
| Color | White |
If you are also weighing wall mounts for a coffee station, the kilimazart wall mount portafilter holder review covers a different kind of mounting hardware entirely.
Frequently asked questions
Which routers does the HOLACA mount fit?
The ASUS ZenWiFi AX XT8 and CT8, with the title adding the XT9.
Does the HOLACA mount include screws?
Yes. The package contains the holder and a screw set.
How many brackets are in the pack?
One. Buy one per node.
Is the router included?
No. The device is sold separately.
