GoodTop GT-SWTXG8FM Review: Fanless 8-Port 10G SFP+ Switch
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The GoodTop GT-SWTXG8FM is a small fanless switch with eight 10G SFP+ cages and a web interface for VLANs, QoS, spanning tree, MAC table and link aggregation (static or 802.3ad LACP, up to eight ports per group). It runs on a Realtek RTL9303 chip, draws about 18 W at full load from a 12 V supply, and is rated for 0-40 C. The one detail to know before buying: the cages run either in 10G/2.5G mode (the default) or in 10G/1G mode, and 1G modules are not recognized until you switch modes in the web page. For a quiet 10G core in a home lab, linking a NAS, a server and a couple of 10G uplinks, it is a compact choice. We compared the listing and specs; we did not run it.
What stands out
- 8 x 10G SFP+ in a fanless case
- LACP with up to 8 ports per group
- About 18 W at full load
- Copper, fiber, DAC and AOC supported
Who it fits
Good fit for
Home labs and small offices that want a silent 10G fiber or DAC core for NAS units, servers and 10G uplinks, with VLANs and link aggregation.
Who should skip it
Anyone who needs routing between VLANs, more than eight 10G links, or mainly RJ45 devices (copper SFP+ modules make it run hot, as the listing admits).
Verdict: A neat silent 8-port 10G switch with the basics; check the port-mode setting if you mix 1G and 2.5G modules.
GT-SWTXG8FM key specs
8 x 10G SFP+
Takes fiber, copper RJ45, DAC and AOC at 10G/2.5G/1G.
Two port modes
10G/2.5G by default; 10G/1G must be set in the web UI.
Web managed
VLAN, QoS, STP, LACP, MAC table, DHCP client.
RTL9303, ~18 W full load
Low power and fanless cooling.
9.13 x 4.96 x 1.1 in
Small enough to screw under a desk or velcro to a shelf.
Housing
A metal case 9.13 by 4.96 inches and 1.1 inches tall, cooled through vents and the shell with no fan. Mounting holes on the bottom take two screws for desk or wall mounting; there are no rack ears listed.
GoodTop notes it can get warm at full load, especially with 10G SFP+ to RJ45 modules, so leave air around it.
Getting it running
Give the switch an IPv4 address first (the listing says this is needed before you can log in), then open the web page to set VLANs, QoS and link aggregation.
If any of your modules are 1G, change the port mode to 10G/1G before plugging them in; in the default 10G/2.5G mode they will not come up.
GoodTop 8-Port, Real HD 8-Port or XikeStor 12-Port?
Choose the GoodTop GT-SWTXG8FM if you want eight fanless SFP+ cages that accept standard modules. Choose the Real HD 8-port SFP+ switch only if you already own TP-Link or Real HD modules, since its listing says it works only with those. Choose the XikeStor 12-Port if you need twelve 10G links plus L3 routing and ERPS.
Check before you buy
- Module types counted (10G, 2.5G or 1G)
- IPv4 address plan for management
- Airflow around the case
- No need for L3 routing
The product at a glance
GoodTop 8-Port 10G SFP+ Smart Switch
Best for: Quiet 10G SFP+ home lab core
- Port Count
- 8
- Management Type
- Smart Web Managed
- Mounting Type
- Desk, Wall
- Number of Ports
- 8 Ports
- Port Speed
- 10G
- Uplink Port Type
- SFP
View on Amazon: GoodTop 8-Port 10G SFP+ Smart Switch Affiliate link
GoodTop GT-SWTXG8FM: fanless 8-port 10G SFP+ web-managed switch with VLAN, QoS, LACP and about 18 W full-load draw.
Pros
- Silent fanless design
- Eight 10G cages
- LACP up to 8 ports
Cons
- 1G modules need a mode change
- No L3 routing
- Warm with copper modules
Good fit if
- You want a quiet 10G lab core
Skip if
- You need VLAN routing on the switch
Verdict: A compact, quiet 10G core for a home lab.
Specifications side by side
| Spec | GoodTop 8-Port 10G SFP+ Smart Switch |
|---|---|
| Port Count | 8 |
| Management Type | Smart Web Managed |
| Mounting Type | Desk, Wall |
| Number of Ports | 8 Ports |
| Port Speed | 10G |
| Uplink Port Type | SFP |
| Intended Use | Home |
| Dimensions | 9.13 × 4.96 × 1.1 inches |
| Color | Black |
| Model | GT-SWTXG8FM |
Frequently asked questions
Does the GoodTop 8-Port SFP+ switch have a fan?
No, it is fanless and cools through vents and the metal case.
Why is my 1G SFP module not detected?
The default mode is 10G/2.5G; switch the port mode to 10G/1G in the web interface.
Does it support link aggregation?
Yes, static and 802.3ad LACP, with up to eight member ports per group.
How much power does the GT-SWTXG8FM use?
GoodTop lists about 18 W at full load from a 12 V supply.
Can it route between VLANs?
The listing names VLAN, QoS, STP and LACP but no Layer 3 routing.
Featured in
See also
- sicsolink 8 port poe switch review
- goalake 8 port easy smart managed switch review
- ugreen 24 port gigabit switch review
- best mesh wifi systems under 100
- best mesh wifi systems under 150
- Best Mesh Wifi Systems Under $200: 10 Spec-Based Picks
- 9 Best Mesh Wifi Systems Under $300, Compared
- Best Mesh Wifi Systems Under $500 in 2026: 8 Picks Ranked by Specs
- thermalright 8 port argb fan hub review
- windmill 8 review
