BV-Tech POE-SW802G Review: 8-Port Gigabit PoE+ Switch, 120W
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The BV-Tech POE-SW802G is a 10-port unmanaged switch built for IP cameras and access points: eight gigabit PoE+ ports that supply up to 30W each from a 120W total budget, plus two gigabit uplink ports for the router and an NVR or second switch. The power supply is internal, so there is no external brick, and power detection checks for a PoE device before sending power, which protects non-PoE gear plugged into the same ports. The housing is metal. The listing gives two sets of dimensions (11.3 x 7 x 1.75 inches in the spec fields, 230 x 150 x 44 mm in the features), so treat the smaller figure as the switch and the larger as possibly the box. This review is drawn from BV-Tech's listing and specs, not from testing.
What stands out
- Eight gigabit PoE+ ports
- 120W total, up to 30W per port
- Two gigabit uplinks
- Internal power supply, metal case
Who it fits
Good fit for
Home and small-business camera systems with up to eight PoE cameras and an NVR, or a few PoE access points, where plug-and-play matters more than settings.
Who should skip it
Buyers who want an SFP fiber uplink, VLANs or PoE scheduling, or the lowest price for an 8+2 PoE+ layout.
Verdict: A straightforward 8+2 PoE+ switch with a built-in supply; it does the job, but similar unbranded 120W switches cost less and TP-Link adds an SFP slot for more.
POE-SW802G specs, explained
8 x gigabit PoE+ (802.3af/at)
Power and data for cameras, phones and APs on one cable.
Up to 30W per port, 120W total
Four ports at full PoE+ draw, or more at lower draw.
2 x gigabit uplinks
Connect the router and an NVR or a second switch.
Smart power detection
Non-PoE devices on the PoE ports stay safe.
Internal power supply
One power cord, no adapter brick.
Metal housing
The listing gives two size sets (see above).
Build
The POE-SW802G uses a compact metal housing and an internal power supply. BV-Tech says the case is designed for quiet running and heat dissipation but does not state whether a fan is fitted. The size conflict in the listing (11.3 x 7 x 1.75 in versus 230 x 150 x 44 mm) means you should measure your shelf against the larger figure to be safe.
Setup and daily use
Connect one uplink to your router, the other to an NVR if you use one, and plug cameras or access points into the PoE ports. Speeds negotiate on their own and there is nothing to configure. Add up your devices' rated draw before you buy: eight cameras of modest draw fit easily, but four devices at the 30W maximum already use the whole 120W.
POE-SW802G, TP-Link TL-SG1210MP or YuanLey 8+2+SFP?
Choose the BV-Tech POE-SW802G if you want a branded 8+2 gigabit PoE+ switch with an internal supply and no settings. Choose TP-Link's TL-SG1210MP if you want an SFP combo uplink, 123W, PoE auto recovery and priority/isolation modes; it costs more. Choose YuanLey's 8-port PoE+ switch with two uplinks and one SFP port if you want a fiber option at a lower price than both.
Check before you buy
- Total device draw at or under 120W
- No device above 30W (no PoE++)
- Gigabit uplink to your router
- Copper only: no SFP slot
The product at a glance
BV 8-Port Gigabit PoE+ Switch
Best for: PoE camera systems
- Port Count
- 10
- Port Speed
- 10/100/1000 Mbps
- Management Type
- Unmanaged
- PoE Support
- PoE+
- PoE Power Budget
- 120 W
- Uplink Ports
- 2 x Gigabit
View on Amazon: BV 8-Port Gigabit PoE+ Switch Affiliate link
BV-Tech POE-SW802G: unmanaged switch with eight gigabit PoE+ ports, two gigabit uplinks, a 120W budget and an internal power supply.
Pros
- 120W PoE+ budget
- Two gigabit uplinks
- Built-in power supply
Cons
- No SFP slot
- No management
- Conflicting size figures in the listing
Good fit if
- You run up to eight PoE cameras and an NVR
Skip if
- You need fiber or VLANs
Verdict: A simple, capable 8-port PoE+ camera switch.
Specifications side by side
| Spec | BV 8-Port Gigabit PoE+ Switch |
|---|---|
| Port Count | 10 |
| Port Speed | 10/100/1000 Mbps |
| Management Type | Unmanaged |
| PoE Support | PoE+ |
| PoE Power Budget | 120 W |
| Uplink Ports | 2 x Gigabit |
| Number of Ports | 8 Ports |
| Uplink Port Type | Gigabit Uplink |
| Dimensions | 11.3 × 1.75 × 7 inches |
| Color | Black |
| Model | POE-SW802G |
If you are also sorting out cooling for the PC on this network, our thermalright 8 port argb fan hub review covers that hub's specs in the same format.
Frequently asked questions
How many PoE ports does the POE-SW802G have?
Eight PoE+ ports, plus two gigabit uplink ports without PoE.
What is the PoE budget?
120W in total, up to 30W on any single port.
Is the BV-Tech switch managed?
No. It is unmanaged and needs no software.
Does it need an external power adapter?
No. The power supply is built in.
Can I plug a non-PoE laptop into a PoE port?
Yes. Power detection only sends power to PoE devices.
