Ubiquiti Networks vs MokerLink Network Switches: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing ubiquiti networks vs MokerLink network switch options for your infrastructure. Both brands offer managed switches with 10G capabilities, but they target different user needs. Ubiquiti focuses on optical aggregation with a compact form factor, while MokerLink provides high port density with L3 routing features. This guide breaks down their specifications to help you decide which hardware aligns with your network architecture.
Key differences
| Aspect | Ubiquiti UniFi Managed 10G Optical Fiber Switch | MokerLink 12-Port 10G SFP+ Managed Switch |
|---|---|---|
| Port Configuration | Aggregation ports | 12 x 10G SFP+ |
| Management Layer | Layer 2 | Layer 3 |
| Switching Capacity | Not listed | 240Gbps |
| Form Factor | Rack-mountable | Metal case |
| Weight | 5.84 pounds | 6.7 pounds |
Which one should you choose?
Choose Ubiquiti UniFi Managed 10G Optical Fiber Switch if
- You need a Layer 2 aggregation switch with rack-mountable design.
- You prefer a lighter unit for smaller installations.
- You require optical fiber connectivity for specific uplinks.
Choose MokerLink 12-Port 10G SFP+ Managed Switch if
- You need Layer 3 management with OSPF and VLAN support.
- You want high port density with 12 SFP+ ports.
- You require a specified 240Gbps switching capacity.
Verdict: Choose Ubiquiti if you need a compact Layer 2 aggregation switch for optical uplinks. Select MokerLink if you require Layer 3 routing features and high port density. Your decision depends on whether you prioritize management depth or physical port count.
Ubiquiti vs MokerLink Switch Specs
Port Density
MokerLink offers significantly higher port density with twelve 10G SFP+ ports, allowing you to connect more high-speed devices directly. Ubiquiti provides an aggregation switch, which typically means fewer ports focused on uplinking rather than end-device connectivity. If you need to terminate many fiber runs or connect multiple 10G devices, MokerLink’s twelve ports provide more utility. Ubiquiti’s design is likely intended to aggregate traffic from other switches rather than serve as a primary access point for many endpoints. For pure port count, MokerLink wins.
Switching Capacity
MokerLink specifies a switching capacity of 240Gbps, ensuring non-blocking line speed forwarding across all twelve ports simultaneously. This high bandwidth supports heavy data transfers without bottlenecks. Ubiquiti lists 10 Gigabit Ethernet connectivity but does not provide a specific switching capacity figure in the available data. Without this number, you cannot verify if Ubiquiti’s internal fabric can handle full wire-speed traffic on all ports at once. MokerLink’s explicit 240Gbps rating gives you a clear performance benchmark for heavy workloads.
Management Features
MokerLink is a Layer 3 managed switch, supporting advanced features like OSPF, DHCP server, ACL, SNMP, and VLAN configuration. This allows for complex routing and security policies in your network. Ubiquiti is described as a Layer 2 switch with IGMP snooping, port mirroring, and spanning tree support. While sufficient for basic segmentation and loop prevention, it lacks the Layer 3 routing capabilities of MokerLink. If you need advanced network routing or detailed policy controls, MokerLink provides more tools.
Form Factor
Ubiquiti is a compact rack-mountable unit measuring 1.7 inches in height, 17.4 inches in width, and 4.7 inches in length. Its small footprint makes it easy to fit into tight rack spaces or smaller enclosures. MokerLink’s dimensions are not fully detailed in the provided data, though it features a metal case and industrial-grade fan. Ubiquiti’s slim profile is a clear advantage for space-constrained installations where rack height is at a premium.
Weight and Build
MokerLink weighs 6.7 pounds, while Ubiquiti weighs 5.84 pounds. Both units use metal construction, with MokerLink explicitly noting an industrial-grade fan for heat dissipation. Ubiquiti includes a built-in power supply, ensuring accurate voltage delivery without external adapters. MokerLink’s weight suggests a robust chassis, but Ubiquiti’s lighter weight may be preferable for smaller racks. Both offer durable builds suitable for commercial applications, making this a tie in terms of perceived solidity.
Which Switch Fits Your Setup
Users needing high port density for many devices
MokerLink provides twelve 10G SFP+ ports, allowing you to connect more high-speed devices directly. This high port density makes it ideal for commercial networks where you need to link numerous servers or access points. The 240Gbps switching capacity ensures non-blocking performance for all connections without bottlenecks.
Users requiring compact rack-mount aggregation
Ubiquiti offers a compact 1.7-inch height, making it easy to fit in tight rack spaces. As an aggregation switch, it focuses on uplinking rather than end-device connectivity. Its Layer 2 features like IGMP snooping and spanning tree help optimize business network performance while maintaining a small physical footprint.
Users needing advanced L3 management and protocols
MokerLink supports L3 management, including OSPF, DHCP server, and ACLs. You get full control over VLAN config and IP-MAC binding. This level of advanced routing and security features suits complex infrastructure needs. The CLI and web interface allow detailed configuration for stable, industrial-grade operation in diverse environments.
The products compared
Ubiquiti UniFi Managed 10G Optical Fiber Switch
Best for: 10G uplink aggregation in rack setups
- Port Speed
- 10 Gigabit
- Mounting Type
- Rack-mountable
- Dimensions
- 4.7 × 17.4 × 1.7 inches
- Weight
- 5.84 pounds
View on Amazon: Ubiquiti UniFi Managed 10G Optical Fiber Switch Affiliate link
This rack-mountable switch adds 10 Gigabit Ethernet uplinks to your network. It uses optical fiber for high-speed connections and includes a built-in power supply. The Layer 2 features cover IGMP snooping and port mirroring. Its slim 1.7-inch height fits standard racks. You should choose this if you need dedicated 10G bandwidth for servers or high-end access points.
Pros
- 10 Gigabit Ethernet port speed
- Rack-mountable form factor
- Optical fiber media support
- Built-in power supply
- Layer 2 management features
Cons
- Only provides 10G uplinks, not full 10G switching
- Requires rack mounting for proper installation
- No 1G copper ports listed for end devices
Good fit if
- You need to aggregate multiple 1G connections into a single 10G link
- You have a rack-mounted server room or network closet
- You use fiber optic cabling for backbone connections
Skip if
- You need a switch with standard 1G Ethernet ports for computers
- You require a desktop or wall-mountable unit
- You want a managed switch with full 10G switching capabilities
Verdict: Ubiquiti UniFi Aggregation Switch is a specialized tool for adding 10G uplinks to existing networks. It fits users who already have 1G infrastructure and need to boost backbone bandwidth using fiber.
MokerLink 12-Port 10G SFP+ Managed Switch
Best for: High-density fiber aggregation and L3 routing
- Port Count
- 12
- Management Type
- L3 Managed
- Uplink Ports
- 12 x 10G SFP+
- Switching Capacity
- 240Gbps
- Port Speed
- Gigabit, 10G
- Weight
- 6.7 pounds
View on Amazon: MokerLink 12-Port 10G SFP+ Managed Switch Affiliate link
This MokerLink switch provides twelve 10G SFP+ ports for high-bandwidth connections. It delivers 240Gbps of switching capacity, allowing all ports to forward at line speed. The device supports L3 management with features like OSPF, VLANs, and CLI access. It uses a metal case with industrial-grade fans for heat dissipation. You should choose this unit if you need dense fiber connectivity and advanced routing controls for a commercial or prosumer network.
Pros
- Twelve 10G SFP+ ports for high-speed fiber connections
- 240Gbps non-blocking switching capacity
- L3 management with OSPF, VLAN, and CLI support
- Supports standard open SFP modules without encryption
Cons
- SFP optical modules are not included in the package
- Only offers SFP uplink ports, lacking RJ45 copper uplinks
- No web interface mentioned, requiring CLI for management
Good fit if
- You need a high-density fiber aggregation point
- You require L3 routing features like OSPF
- You prefer CLI management over a web interface
Skip if
- You need plug-and-play RJ45 uplinks
- You want included SFP optical transceivers
- You prefer a simple web-based management interface
Verdict: MokerLink 12-Port 10G Managed Switch suits users who need dense fiber connectivity and advanced L3 routing controls. It fits best for network administrators who manage complex topologies via CLI.
Specifications side by side
| Spec | Ubiquiti UniFi Managed 10G Optical Fiber Switch | MokerLink 12-Port 10G SFP+ Managed Switch |
|---|---|---|
| Port Count | not stated | 12 |
| Port Speed | 10 Gigabit | not stated |
| Management Type | not stated | L3 Managed |
| Uplink Ports | not stated | 12 x 10G SFP+ |
| Switching Capacity | not stated | 240Gbps |
| Mounting Type | Rack-mountable | not stated |
| Uplink Port Type | not stated | SFP |
| Dimensions | 4.7 × 17.4 × 1.7 inches | not stated |
| Weight | 5.84 pounds | 6.7 pounds |
| Size | 1.7" x 17.4" x 4.7" | not stated |
| Color | Information Not Available | Black |
| Model | USW-AGGREGATION | 12*10G SFP Managed |
Frequently asked questions
Is Ubiquiti a better choice for small rack setups?
Yes, if space is tight. The Ubiquiti UniFi Managed 10G Optical Fiber Switch measures 1.7 inches in height. This compact profile fits easily into standard equipment racks. It weighs 5.84 pounds, making it a lightweight option for aggregation tasks. You get a specialized tool for boosting backbone bandwidth without taking up much room.
Does MokerLink support Layer 3 routing?
Yes, it does. The MokerLink 12-Port 10G SFP+ Managed Switch is designed for advanced L3 routing controls. This feature suits network administrators managing complex topologies. You can configure routing protocols directly via the command line interface. It is ideal for users who need detailed control over network traffic flow and segmentation.
Which switch has more 10G ports?
The MokerLink unit offers more ports. It provides twelve 10G SFP+ ports for high-density connectivity. This allows you to connect many devices directly at high speeds. The Ubiquiti model focuses on aggregation rather than end-device connectivity. It has fewer ports, designed specifically for uplinking existing infrastructure to a faster backbone.
Can I manage the MokerLink switch via CLI?
Yes, command line interface access is available. The MokerLink switch is a managed device that supports CLI configuration. This is helpful for administrators who prefer script-based management or advanced troubleshooting. You can set up VLANs, routing policies, and other network parameters directly through the terminal. It suits users who need granular control over their network settings.
Is the Ubiquiti switch good for fiber uplinks?
It is specialized for this purpose. The Ubiquiti UniFi Managed 10G Optical Fiber Switch is built for adding 10G uplinks. It fits users who already have Gigabit infrastructure and need to boost backbone bandwidth. The device uses optical fiber connections to aggregate traffic. It is not designed for general end-device connectivity but for core network expansion.
What is the weight of the MokerLink switch?
The MokerLink 12-Port 10G SFP+ Managed Switch weighs 6.7 pounds. This weight reflects its dense port configuration and metal chassis. It is slightly heavier than the Ubiquiti aggregation switch. The additional mass provides stability for rack mounting. You can expect a solid build quality suitable for continuous operation in a network closet or server room.