Tenda 5-Port Gigabit PoE+ Switch Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This tenda 5 port poe switch review covers the Tenda TEG1105P. It is an unmanaged switch with five Gigabit Ethernet ports. Four of these ports support PoE+ (IEEE 802.3af/at) standards. The total power budget is 63W. This device delivers both data and power over a single cable. It features a 6kV surge protection rating. The metal housing is fanless for silent operation. You get one dedicated Gigabit uplink port. This setup simplifies wiring for connected devices.
What stands out
- 4 IEEE 802.3af/at PoE+ ports with a 63W total budget
- One-Key VLAN isolation to prevent broadcast storms
- 6kV surge protection for hardware safety
- Fanless metal design for silent, 24/7 operation
Who it fits
Good fit for
This switch suits small offices and home surveillance setups. You can power IP cameras, WiFi 6 access points, and VoIP phones directly. The 63W budget handles multiple devices. VLAN isolation helps secure specific ports. The compact size fits desktops or walls. Silent operation is ideal for quiet environments. Plug-and-play setup requires no configuration.
Who should skip it
Skip this if you need advanced management features. This is an unmanaged switch with no web interface. You cannot monitor traffic or update firmware remotely. The 63W budget may be too low for high-power devices like PTZ cameras. If you require PoE++ (802.3bt) support, this model does not offer it. Look elsewhere for managed switching capabilities.
Verdict: The Tenda TEG1105P is a straightforward, secure option for basic PoE deployments. It delivers reliable power and data without complexity.
Key specs for your network
PoE Support: PoE+ (IEEE 802.3af/at)
This standard ensures compatibility with most modern devices like WiFi 6 access points and security cameras. You can connect equipment that requires higher power without needing separate adapters. It is the baseline for reliable home and small office networking. Check your device manuals to confirm they support this standard before purchasing. This avoids compatibility issues and ensures stable power delivery over Ethernet cables.
PoE Power Budget: 63W
The total power available across all PoE ports is 63 watts. This allows you to power multiple devices simultaneously, such as four cameras and an access point. If you plan to connect many high-power devices, verify that their combined draw stays under this limit. This budget is suitable for typical residential setups. It prevents overloading the switch and ensures consistent performance for all connected gear.
Port Count: 5
This switch offers five connection points for your network devices. Four ports provide PoE power and data, while one port serves as a standard uplink. This configuration is ideal for connecting key devices like cameras and APs directly. It reduces the need for additional switches in small spaces. Consider your total device count to ensure you have enough ports for future expansion or current needs.
Port Speed: Gigabit
All ports support Gigabit Ethernet speeds, allowing for fast data transfer rates. This ensures smooth streaming, quick file transfers, and responsive WiFi performance when connected to access points. Gigabit speeds are the current standard for home networks. They handle modern bandwidth demands better than older Fast Ethernet options. Verify that your connected devices also support Gigabit to fully utilize this capability.
Design and build overview
The Tenda TEG1105P has a white metal housing. According to the listing, it measures 3.94 inches in width, 3.94 inches in length, and 1.02 inches in height. This compact footprint allows it to sit on a desk or mount on a wall. The metal construction aids in passive heat dissipation. It operates silently because it lacks a fan. This design choice supports reliable 24/7 operation in quiet home offices or living spaces without generating noise.
The layout features five Gigabit Ethernet ports. Four ports support PoE+ standards, while one serves as a dedicated uplink. There are no external buttons or screens. The VLAN isolation is managed via an internal toggle switch. This unmanaged approach means you plug in devices and they work automatically. The metal casing also provides 6kV surge protection. This safeguard shields connected equipment from power spikes. The simple, fanless design ensures the switch remains discreet and durable in small office or retail environments where space is limited.
Setup and Everyday Use
You do not need software or configuration to set up this switch. It operates as an unmanaged device, meaning you simply plug in your Ethernet cables. The unit automatically detects connected devices and delivers the exact power they require. This plug-and-play approach saves time for home surveillance, retail stores, or small office networks. You can connect IP security cameras, WiFi 6 access points, and VoIP phones without complex setup steps.
For everyday use, the switch provides silent operation due to its fanless metal housing. It dissipates heat passively, ensuring reliable 24/7 performance without noise. The listing notes built-in 6kV surge protection, which safeguards your connected gear from power spikes and lightning. This feature adds a layer of security for your network investment.
You can mount the device on a wall or place it on a desktop, saving valuable space. The compact size fits easily into tight areas. A key feature for daily stability is the one-key VLAN isolation. You can toggle the VLAN switch to isolate PoE+ ports one through four from each other. This prevents broadcast storms and DHCP spoofing while keeping communication smooth with the uplink port. The single Gigabit uplink port connects the switch to your main router or internet source. This setup allows you to manage multiple powered devices efficiently without needing additional power adapters or separate data lines.
Before you buy this switch
You need a compatible router or switch to connect the single Gigabit uplink port. Without this, your PoE devices will not access the internet or your local network. Check that your existing network gear supports standard Ethernet protocols to ensure smooth data flow. You should also verify that your PoE devices, such as security cameras or access points, adhere to IEEE 802.3af or 802.3at standards. This switch does not provide power for devices outside these specifications. Since the unit is fanless, ensure it has adequate airflow. Dust accumulation can affect heat dissipation over time. You may need to clean the vents periodically to maintain silent operation. This model fits well in small offices or home setups where space is limited. It serves as a practical extension for your existing Mesh WiFi system, allowing you to add wired connections without complex configuration. It is not suitable for large enterprise environments requiring advanced management features.
Check before you buy
- Verify your router has an available Gigabit Ethernet port for the uplink connection.
- Confirm your PoE devices support IEEE 802.3af or 802.3at power standards.
- Ensure the total power draw of all connected devices stays under 63W.
- Check that your mounting location allows for proper heat dissipation.
- Confirm your network infrastructure supports VLAN isolation if you plan to use it.
The product at a glance
Tenda 5-Port Gigabit PoE+ Switch
Best for: Small office surveillance and APs
- Port Count
- 5
- Port Speed
- Gigabit
- Management Type
- Unmanaged
- PoE Support
- PoE+ (IEEE 802.3af/at)
- PoE Power Budget
- 63 W
- Uplink Ports
- 1 x Gigabit
View on Amazon: Tenda 5-Port Gigabit PoE+ Switch Affiliate link
This unmanaged Tenda switch offers four PoE+ ports and one Gigabit uplink. It delivers up to 63W of power budget, supporting IEEE 802.3af/at standards. The device features a one-key VLAN isolation toggle to prevent broadcast storms. It includes 6kV surge protection and a fanless metal design for silent operation. You can mount it on a wall or desk. It suits small offices or home surveillance setups.
Pros
- 4 PoE+ ports with 63W total budget
- One-key VLAN isolation for security
- 6kV surge protection included
- Fanless metal housing for silent use
- Wall or desktop mounting options
Cons
- Unmanaged configuration requires manual cabling
- Limited to 5 total ports
- No remote management interface
Good fit if
- You need to power IP cameras and APs
- You want silent operation without fans
- You require basic VLAN isolation
Skip if
- You need more than 5 ports
- You require remote web management
- You need PoE++ (802.3bt) support
Verdict: Tenda 5-Port PoE+ Switch provides reliable power and basic isolation for small networks. It fits users who prioritize silent, wired simplicity over remote control.
Specifications side by side
| Spec | Tenda 5-Port Gigabit PoE+ Switch |
|---|---|
| Port Count | 5 |
| Port Speed | Gigabit |
| Management Type | Unmanaged |
| PoE Support | PoE+ (IEEE 802.3af/at) |
| PoE Power Budget | 63 W |
| Uplink Ports | 1 x Gigabit |
| Mounting Type | Desktop, Wall mount |
| Number of Ports | 5 Ports |
| Uplink Port Type | Gigabit Uplink |
| Dimensions | 3.94 × 3.94 × 1.02 inches |
| Weight | 6.88 ounces |
| Size | 5 Port w/4 PoE+ Port |
| Color | White |
| Model | TEG1105P |
Frequently asked questions
Does this switch support WiFi 6 access points?
Yes, it is compatible with modern WiFi 6 access points. The four PoE+ ports adhere to the IEEE 802.3af/at standards. This ensures you can power devices that require higher wattage without needing separate power adapters. It provides a reliable baseline for home networking equipment.
How much total power does the Tenda TEG1105P provide?
The switch offers a total power budget of 63W. This capacity is shared across the four PoE-enabled ports. It delivers both data and power over a single Ethernet cable. You can connect multiple devices like cameras or APs without exhausting the available power supply.
Is the Tenda 5-Port Gigabit PoE+ Switch unmanaged?
Yes, this device operates as an unmanaged switch. You do not need software or complex configuration to set it up. Simply plug in your Ethernet cables, and the unit automatically detects connected devices. It delivers the exact power each device requires for immediate operation.
What are the physical dimensions of the Tenda TEG1105P?
The unit measures 3.94 inches in width, 3.94 inches in length, and 1.02 inches in height. It features a white metal housing. This compact footprint allows it to sit on a desk or mount easily. It fits well in small office spaces or home networks.
Can I connect this switch directly to the internet?
No, you need a compatible router to connect to the internet. The switch has a single Gigabit uplink port that must connect to your existing network gear. Without this upstream connection, your PoE devices will not access the internet or your local network resources.
Who is the best user for this Tenda switch?
It is best for small office surveillance systems and access points. The device fits users who prioritize silent, wired simplicity over remote control features. It provides reliable power and basic isolation for small networks. It is ideal for those who want a plug-and-play solution.