LINOVISION 8-Port Industrial Gigabit PoE++ Review: Specs, Pros and Cons

What stands out

• Four ports deliver up to 90W each via IEEE 802.3bt PoE++
• Redundant DC48-56V power inputs ensure continuous operation
• Total PoE budget expands to 240W with optional Mean Well supply
• Two 1000Base-X SFP ports provide flexible fiber uplinks

Who it fits

Key specs explained for LINOVISION switch

Port Speed: 10/100/1000Base-T

This indicates the switch supports Gigabit Ethernet speeds on its eight data ports. You get up to 1000 Mbps for connected devices. This matches the speed of most modern Mesh WiFi nodes and wired computers. It ensures your local network traffic does not bottleneck when transferring large files or streaming high-resolution video between devices in your home or office.

PoE Support: IEEE 802.3af/at/bt

The switch complies with the latest Power over Ethernet standards, including the new PoE++ (802.3bt) specification. This allows you to power a wider range of devices, from standard security cameras to high-drain equipment like PTZ cameras or digital signage. You do not need separate power outlets for these devices, simplifying your installation and reducing cable clutter significantly.

PoE Power Budget: 120W

The total power available to all connected PoE devices is 120 watts. This limits how many high-power devices you can run simultaneously. For typical home use with IP cameras and access points, this is often sufficient. However, if you plan to power many high-wattage devices, you may need to check individual device requirements or consider the optional 240W power supply for increased capacity.

Uplink Ports: 2 x 1000Base-X SFP

These are two fiber optic uplink ports that provide high-speed connections to your main router or network backbone. They offer more stability and longer distance transmission than copper Ethernet cables. This is useful if your switch is located far from your primary networking gear. It also frees up copper ports for end devices while maintaining high bandwidth for internet traffic.

Port Count: 8

The device provides eight dedicated Ethernet ports for connecting wired devices. This count is ideal for small to medium setups with several cameras, phones, or access points. It offers more connectivity than typical consumer routers. You can connect your Mesh WiFi nodes or desktop computers directly to these ports for stable, low-latency connections without relying solely on wireless signals.

Design and build details

The LINOVISION switch measures 4.3 by 6.42 by 1.81 inches. It weighs 3.33 pounds. The listing describes the color as black. These dimensions suggest a compact footprint suitable for tight installations. The weight indicates a solid internal construction. This build quality helps with stability in industrial settings. You likely need a sturdy mount or DIN rail for secure placement.

According to the listing, the device supports redundant power inputs. It accepts 48-56V DC through two channels. This design allows for continuous operation even if one power source fails. The switch also supports 8-pin simultaneous power supply. This feature ensures reliable power delivery in critical network nodes. You can use it for high-uptime requirements like security cameras or access points.

The unit includes eight Gigabit PoE ports and two SFP uplinks. The layout is straightforward for cable management. Four ports deliver up to 90W of power. The remaining four ports provide up to 30W. This split supports a mix of high-power and standard devices. The compact size and robust power options make it ideal for distributed networks. You can install it in server racks or outdoor enclosures. The design prioritizes function over flashy aesthetics. This practical approach fits well in professional environments where reliability matters most.

Setup and Daily Use Guide

Setting up this switch involves connecting your network cables to the eight Gigabit Ethernet ports or the two SFP uplinks. The listing notes that each PoE port can also function as an uplink, offering flexibility in cabling. You must provide power using the included 120W UL-certified adapter. For higher performance, you can install an optional Mean Well 240W DIN rail power supply. This upgrade increases the total PoE budget to 240W. The unit supports redundant power inputs via two channels of DC48-56V. This feature allows for simultaneous power supply, ensuring continued operation if one power source fails. The switch accepts 8-pin simultaneous power connections with specific positive and negative configurations. It supports both POE Mode A and B output. In daily use, the device powers connected equipment automatically. Four ports deliver up to 90W each, suitable for high-power devices like PTZ cameras or PoE monitors. The remaining four ports provide up to 30W per port. This covers standard PoE+ devices. The switch complies with IEEE 802.3af, at, and bt standards. It works with non-PoE devices as well, passing data without supplying power. This compatibility extends to IP cameras, VoIP phones, and IoT devices. The industrial design suggests it handles demanding environments. You do not need to configure complex settings for basic operation. The hardware handles power negotiation automatically based on the connected device’s needs. This plug-and-play approach simplifies deployment for surveillance or network infrastructure projects.

Before You Buy This Switch

Before you buy this LINOVISION 8-Port Industrial Gigabit PoE++ Switch, verify your power needs. Four ports deliver up to 90W each, supporting high-power devices like PTZ cameras or lighting. However, the total PoE budget is only 120W. If you plan to power many high-draw devices simultaneously, you may need the optional Mean Well 240W DIN rail power supply. Check your device compatibility, as it supports IEEE 802.3af/at/bt standards. This ensures it works with standard PoE, PoE+, and PoE++ equipment. You should also confirm your network topology. The two SFP uplinks offer flexibility, but ensure your existing routers or switches have compatible fiber interfaces. This switch fits well in industrial or dense home networks where reliability matters. It complements Mesh WiFi systems by providing stable wired backhaul or connecting access points. Review your cable lengths and power requirements carefully to avoid bottlenecks. Ensure your installed devices match the port speed and PoE standards listed.

Check before you buy

• Verify total power budget fits your device needs.
• Check if optional 240W power supply is necessary.
• Confirm SFP uplink compatibility with existing gear.
• Ensure devices support IEEE 802.3af/at/bt standards.

The product at a glance

1

LINOVISION 8-Port Industrial Gigabit PoE++ Switch

Best for: High-power PoE++ and redundant power needs

Port Count

8

Port Speed

10/100/1000Base-T

PoE Support

PoE++, PoE+

PoE Power Budget

120W

Uplink Ports

2 x Gigabit SFP

Mounting Type

DIN-Rail

View on Amazon: LINOVISION 8-Port Industrial Gigabit PoE++ Switch Affiliate link

This LINOVISION switch offers 8 Gigabit Ethernet ports and 2 SFP uplinks for industrial networking. Four ports support 90W PoE++ output, while the remaining four provide up to 30W. The total PoE budget is 120W with the included adapter, expandable to 240W with an optional supply. It features redundant DC power inputs for reliability. This unit suits users needing high-power delivery and robust connectivity in demanding environments.

Pros

• 4 ports deliver up to 90W PoE++ power
• Redundant dual DC power input support
• 2 SFP uplink ports for fiber connectivity
• UL-listed 120W power adapter included

Cons

• Total PoE budget limited to 120W with default adapter
• Requires optional power supply for higher budget
• No mention of web management interface

Good fit if

• You need 90W PoE++ for high-power devices
• You require redundant power inputs for reliability
• You need SFP uplink ports for fiber

Skip if

• You need more than 8 Gigabit ports
• You require PoE++ on all 8 ports
• You need a built-in high-capacity power supply

Verdict: LINOVISION 8-Port Industrial PoE Switch delivers high-power PoE++ on four ports with redundant power options. It fits installations needing 90W per port and fiber uplinks.

Specifications side by side

Frequently asked questions

See also

• linovision industrial 8 port gigabit poe alternatives
• best mesh wifi systems under 100
• garveehome industrial dining table 6 8 review
• reolink 8 channel 5mp poe security review