Hohtouying 8-Port Gigabit PoE Switch Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This hohtouying 8 port gigabit poe review covers a compact unmanaged switch designed for small-scale surveillance setups. It features eight Gigabit PoE ports and two dedicated Gigabit uplink ports. The total PoE budget is 120W, allowing up to 30W per port. This capacity supports standard 802.3af/at devices like wireless access points and IP cameras. The unit operates silently with a fanless design. It also includes basic network protection features. You get a straightforward plug-and-play solution for extending power and data to endpoints without complex configuration.
What stands out
- 120W total PoE budget with 30W per port limit
- Eight Gigabit PoE ports plus two Gigabit uplink ports
- CCTV mode extends PoE transmission distance up to 820 feet
- VLAN mode isolates downlink ports while allowing uplink communication
- 4KV lightning protection on ports for enhanced durability
Who it fits
Good fit for
This switch suits users running small IP camera systems who need simple deployment. The CCTV mode is useful for long cable runs where standard distance limits are exceeded. The VLAN mode helps isolate camera traffic from other network devices, improving security for basic setups. If you need to power multiple wireless access points or cameras in a home or small office, this unmanaged unit provides the necessary ports and budget without requiring management software or complex setup.
Who should skip it
You should look elsewhere if you require advanced network management features. This is an unmanaged switch, so you cannot configure VLANs, QoS, or port mirroring via a web interface or app. It does not support passive PoE devices, which require additional splitters. If you need to power 24V wireless APs directly, this switch is incompatible without a splitter. Users requiring more than 120W total power or more than eight PoE endpoints will find this model insufficient for their needs.
Verdict: The Hohtouying 8-Port Gigabit PoE Switch offers a practical, unmanaged solution for small surveillance and networking tasks. Its extended transmission modes and solid PoE budget make it a reliable choice for basic installations.
Key specs explained
Port Count: 10
The switch offers ten total ports, split into eight PoE ports for devices and two uplink ports for your main network. You can connect cameras directly to the PoE ports while linking the uplinks to your router or NVR. This layout keeps data and power separate from your core internet connection, simplifying your cable management and reducing clutter in your network rack.
PoE Power Budget: 120W
The device can deliver a maximum of 120W of power across all PoE ports simultaneously. With a limit of 30W per port, you can power multiple high-demand devices like PTZ cameras or wireless access points without needing external power bricks. This budget ensures you have enough headroom for several active devices, making it suitable for small to medium surveillance installations.
Port Speed: 1000 Mbps
All ten ports support Gigabit speeds, ensuring fast data transfer for your connected devices. This speed is sufficient for streaming high-resolution video from IP cameras or transferring large files between networked storage. If you plan to add more devices later, this bandwidth prevents bottlenecks, keeping your local network responsive even when multiple devices are active at the same time.
PoE Support: PoE+ (802.3af/at)
The switch complies with the 802.3af and 802.3at standards, meaning it works with standard 48V PoE devices. It does not support passive PoE or 24V devices without an additional splitter. This compatibility ensures you can use most common IP cameras and access points. Always check your device specifications to confirm it uses standard PoE before connecting it to this switch.
Management Type: Unmanaged
This switch operates without a web interface or configuration software, making it plug-and-play. You simply connect the cables, and it starts working immediately. This simplicity is ideal for users who want a reliable connection without dealing with complex settings. It is best suited for basic networking tasks where advanced traffic shaping or VLANs are not required for your specific setup.
Design And Build Overview
The listing describes the unit as a black box measuring 7.87 inches long, 4.72 inches wide, and 1.57 inches high. This compact footprint allows you to place it in tight spaces like a server rack or a small utility closet. The design is fanless, which means it operates silently and consumes less power. This makes it suitable for areas where noise is a concern, such as near living spaces or quiet offices.
According to the listing, the switch features a built-in 120W power supply. This eliminates the need for an external power brick, reducing cable clutter. The front panel likely houses the ten Gigabit Ethernet ports. Eight ports support PoE+ (802.3af/at) for connecting devices like IP cameras, while two ports serve as uplinks for routers or NVRs. There are no visible management interfaces or buttons, confirming its unmanaged nature. You configure it simply by plugging in cables.
The build includes professional lightning protection rated at 4KV for the ports. This design choice helps protect connected devices from power surges, which is useful for outdoor camera setups. The listing also notes strong anti-interference features and short-circuit protection. These elements suggest a focus on durability and reliability for continuous operation. The straightforward layout supports quick installation without complex setup procedures.
Setup And Daily Use Guide
This switch is unmanaged, so you do not need to install software or access a web interface. Setup involves connecting your router or NVR to one of the two Gigabit uplink ports using standard Ethernet cables. You then plug your IP cameras or wireless access points into the eight PoE ports. The unit includes a built-in AC power supply, so you only need to connect the provided power cable to a wall outlet. Once powered, the device begins transmitting data and power automatically. You can adjust three switch modes using physical toggles. The default mode provides standard 10/100/1000 Mbps speeds for all ports. Enabling CCTV mode extends PoE transmission distance up to 820 feet, which is useful for long cable runs. The VLAN mode isolates downlink ports from each other while allowing communication with uplinks, which helps segment network traffic. The switch supports 802.3af/at standards, delivering up to 30W per port for a total budget of 120W. Note that it only powers standard 48V devices. If you have 24V wireless APs, you must use a PoE splitter. The fanless design ensures silent operation, making it suitable for offices or homes. Lightning protection up to 4KV safeguards connected devices from surges. If a cable short occurs, the unit protects itself and recovers fully once you reconnect the AC power. This straightforward plug-and-play approach requires no technical configuration for basic surveillance networks.
Before You Buy This Switch
This switch supports 802.3af/at devices only. It does not power 24V wireless access points. You must use a PoE splitter for those. Check your camera voltage before connecting. The unit provides 120W total budget. This allows 30W per port. Verify your devices draw less than 30W each. The switch includes four-kilovolt lightning protection. This helps if you install cameras outdoors. Ensure your Ethernet cables are shielded for best results. The fanless design means silent operation. You do not need to monitor noise levels. This model fits well alongside other unmanaged switches. It lacks web management features. You cannot configure VLANs remotely. Use the physical switch for isolation. This makes it simple for small setups. It suits IP cameras best. Avoid using it for complex home networks. You need a separate router for internet. This switch only handles local traffic. Keep the power cable accessible. The unit is compact but heavy. Place it on a stable surface. Do not stack other electronics on top. This ensures proper airflow and safety.
Check before you buy
- Confirm devices use 802.3af/at standard, not 24V passive PoE.
- Ensure total power draw stays under 120W budget.
- Verify each camera draws less than 30W per port.
- Check if you need VLAN isolation for security.
The product at a glance
Hohtouying 8-Port Gigabit PoE Switch
Best for: small IP camera networks
- Port Count
- 10
- Port Speed
- 1000 Mbps
- Management Type
- Unmanaged
- PoE Support
- PoE+ (802.3af/at)
- PoE Power Budget
- 120W
- Uplink Ports
- 2 x Gigabit
View on Amazon: Hohtouying 8-Port Gigabit PoE Switch Affiliate link
This unmanaged switch provides 8 PoE+ ports and 2 gigabit uplinks for a total budget of 120W. It supports 802.3af/at standards to power devices like IP cameras. The unit features a fanless design for silent operation and includes 4KV lightning protection. You can use three switch modes, including CCTV mode to extend transmission distance up to 820 feet. It is suitable for small network setups requiring reliable power delivery.
Pros
- 120W total PoE power budget
- 8 PoE+ ports at 1000 Mbps
- Fanless silent operation design
- 4KV lightning protection
- CCTV mode extends range to 820ft
Cons
- Only supports 48V active PoE devices
- Unmanaged with no web interface
- No VLAN isolation for downlink ports in default mode
Good fit if
- You need to power multiple IP cameras
- You want silent operation without fans
- You require extended cable distance for CCTV
Skip if
- You need smart network management features
- You want to power 24V wireless APs directly
- You need more than 120W of power
Verdict: Hohtouying 8-Port Gigabit PoE Switch is a straightforward solution for powering up to eight devices with a 120W budget. It fits well in small installations where silent operation and extended CCTV range matter more than advanced configuration options.
Specifications side by side
| Spec | Hohtouying 8-Port Gigabit PoE Switch |
|---|---|
| Port Count | 10 |
| Port Speed | 1000 Mbps |
| Management Type | Unmanaged |
| PoE Support | PoE+ (802.3af/at) |
| PoE Power Budget | 120W |
| Uplink Ports | 2 x Gigabit |
| Number of Ports | 8 Ports |
| Uplink Port Type | Gigabit Uplink |
| Recommended Use | IP Cameras |
| Dimensions | 7.87 × 4.72 × 1.57 inches |
| Color | black- Gigabit |
| Model | 10 Gigabit Ports|120W 8xPoE+ |
Frequently asked questions
What is the total PoE budget for this switch?
The Hohtouying 8-Port Gigabit PoE Switch provides a total power budget of 120W. This capacity is distributed across the eight PoE ports. You can expect up to 30W per port for connected devices. This limit supports standard IP cameras and similar equipment. It does not support high-power devices like 24V wireless access points. You must use a PoE splitter for those specific units.
Is this switch managed or unmanaged?
This unit is an unmanaged switch. You do not need to install software or access a web interface to configure it. Setup is straightforward: connect your router or NVR to the uplink ports and plug your devices into the PoE ports. It operates silently without fans. This makes it ideal for small installations where advanced configuration options are not required.
How many ports does the Hohtouying switch have?
The switch features ten total ports. Eight of these are Gigabit PoE ports for connecting devices like IP cameras. Two additional ports serve as Gigabit uplinks for your main network. This split allows you to power cameras directly while maintaining high-speed connectivity to your router or network video recorder. The design supports small-scale surveillance setups efficiently.
What are the dimensions of this PoE switch?
The device measures 7.87 inches in length, 4.72 inches in width, and 1.57 inches in height. It is finished in black. This compact footprint allows you to place it in tight spaces. You can easily mount it in a server rack or a small utility closet. The small size helps it fit discreetly in residential or small office environments without taking up much room.
Can this switch power 24V wireless access points?
No, this switch does not support 24V wireless access points. It is designed for 802.3af/at compliant devices only. If you need to power a 24V device, you must use a PoE splitter. Always check your camera or device voltage requirements before connecting. Using the wrong power type can damage your equipment or prevent it from functioning correctly.
What is the best use case for this switch?
This switch is best for small IP camera networks. It offers a straightforward solution for powering up to eight devices. Silent operation and extended CCTV range are key benefits. It fits well in small installations where advanced configuration options are not needed. If you need to power wireless access points or require complex network management, this unit may not meet your needs.